How a Smart Fastening System Improves Production Output

Whether you’re a production line manager or quality manager, improving your production is a constant project. That means finding cost-effective ways to increase speed and decrease lost products. When you’re working with products that are held together with threaded fasteners, managers often find room for improvement with their fastening systems.

That doesn’t necessarily mean shutting down production for six months to install a brand-new, custom-built pneumatic tube-fed automatic laser-guided cloud-programmed fastening system. Sure, if you’ve looked at the numbers and it works, go for it. But there are many less onerous ways to improve the productivity of your fastening system. Chief among them is investing in or upgrading to a new set of wrenches or screwdrivers and implementing an effective calibration and maintenance system. The right fastening system isn’t always the one that’s newest, biggest, fastest or any other kind of -est. It’s the fastening system that improves your production. Here’s how the right torque tools can enhance your production quality and speed.

Improve Production Quality with Torque Tool Fastening Systems

Dad used to say that a job wasn’t done if it wasn’t done right. That’s as true inline or cell assembly work as it was about cutting the grass. Your product loss rate is a measure of the efficiency of your operation. Given a certain amount of source materials, your operation should theoretically produce a certain number of products. Your loss rate is the difference between how many products you should produce and how many you produce. Profitability for a quarter or a year can hinge on how much product you lose. Simply put, those source materials cost money, and if you waste too much of them, then you won’t generate enough product to make that money back. 

Even if a product passes your quality assurance program and enters the real world, quality issues can still cause problems. The real people who use your products will report defects and demand replacements. Product issues can threaten safety as well, exposing your company to liability. The reputational damage can, in turn, lower sales and diminish profitability.

When assembling products that use threaded fasteners—like bolts, nuts, or screws—knowing that you’re applying the proper torque to each fastener is a significant step towards guaranteeing product quality. Torque is the radial force that turns screws, squeezing their threads together and holding them in place. You can find the torque values for your fasteners from your product designers or, if you’re a contract manufacturer, from your client firm. Once you know the values, applying the correct amount of torque is a matter of investing in a set of hand, pneumatic, or electric torque tools and training employees in their use.

If you already employ torque tools and are still experiencing quality issues with your threaded fasteners, then the problem may be in your calibration procedures. Tools should be checked for calibration once every six to twelve, either in-house using your own equipment or at a certified laboratory. Any tools found out of calibration should be flagged, removed from service, recalibrated, and have their calibration interval halved.

Of course, check tool calibration more often. Think about it—if once every six months you test a tool and find that it’s not producing the right amount of torque, that means every fastener that tool has touched for the last five months and twenty-nine days may not be tightened correctly. That sort of thought can wake you up sweating in the middle of the night. With a set of high-quality torque tools kept in continuous calibration, you should be able to reduce any lost product resulting from improper fastening.

Improving Production Speed with the Right Fastening System

When we think of production speed, it’s natural for our minds to travel towards whizzing assembly lines populated with robotic tool arms, fed by a byzantine system of cables and tubes. Indeed, these systems are very fast; if nothing else, they’re very cool. But perhaps most importantly, they’re very expensive. If your production line doesn’t have the volume that requires this sort of system, then the added capacity this provides may generate a return on your investment. 

Instead, consider the fastening system you’re currently using. Where are the bottlenecks? What are the slower parts of the operation? By improving these, you’ll be able to increase the speed of the entire production. For example, many smaller and mid-sized factories provide workers with slotted trays or shaker trays to hold their screws. Workers must look down, find the right screw, pick it up, set it on the driver, and finally fasten it. A simple solution, like an automatic screw dispenser that delivers new screws to a fixed point, significantly reduces the time of each fastening motion, which adds up to a faster production time and a higher production capacity.

Other seemingly simple fixes can increase speed as well. Go for the low-hanging fruit. It’s easy, and it’s ripe. If your workers use hand screwdrivers on the line or in their cell, consider upgrading them to electric screwdrivers to reduce cycle time. Combine electric screwdrivers with automatic screw dispensers to multiply their effects by each other. Add in ergonomic tool arms or balancers for your workers, and you’ll reduce time lost to fatigue or injury. If you’ve done all this already and still need more capacity, then it may be time to consider a more complicated, fully automated assembly solution. Do the math, though—would it be more profitable just to buy a new factory and double production? Minor changes to your torque fastening system can improve both your production quality and speed. Investing in quality torque tools and training employees to use them will reduce lost products. Regularly testing your tools will keep your operators from accidentally over- or under-torquing their fasteners.

Small equipment upgrades—like adding several electric screwdrivers, a new ergonomics program, or an automatic screw dispenser—can increase production speed without starting a costly, involved renovation. Improvement is a constant, daily journey, taken a little at a time. Wherever your factory is, consider how torque tools will help you take the next step.

The Mountz smart electric screwdriver solution safeguards against fastening failures. The torque control system expedites all aspects of the automation process, from installing error-proofing disciplines to adaptive fastening strategies. The screwdriver system can implement multiple fastening steps into a simple workflow process for sensitive and complex assembly joints. The screwdriver system offers benefits for improving consistency and quality.

The Mountz smart electric screwdriver solution is for process reliability and efficiency with intelligent fastening strategies and high-precision torque accuracy. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

How to Check if a Torque Tools Manufacturer or Service Center is ISO Certified

The difference is quality. Companies invest in torque tools to improve their products’ quality. Using torque tools, manufacturers and service professionals can ensure that each fastener they touch will not fail due to being too loose or tight. Often, a company’s reputation and market share depend on the reliability of its products. Human lives depend on a company’s ability to torque its fasteners properly for certain critical products, like implantable medical devices. So, for good reason, companies need their torque tools to guarantee proper fastening. As a result, a company’s products are only as reliable as the torque tools used to screw or bolt them together. To ensure the dependability of their products, companies must carefully research the quality of their tool vendors. One way to and effectively vet the reliability of a torque tools manufacturer or service center is to check if they’re certified under ISO standards.

ISO Certifications for Torque Tool Manufacturers and Service Centers

First things first: what is ISO, and why do their standards matter? The International Organization for Standardization (ISO) is a non-governmental organization dedicated to creating and promulgating blanket standards for companies and governments across the world. ISO’s standards cover quality assurance management, testing and calibration laboratory management, and information security management. These standards are developed by experienced professionals in their relative fields and are updated over time. By publishing these standards, ISO establishes best practices for companies to follow. It gives companies guidelines for success, increasing industrial productivity and improving public safety. It also offers other companies a way to determine at a foundational level the quality of the different businesses from which they purchase tools or services. A company doesn’t have to be ISO certified to create high-quality products or services. However, if a company is ISO certified, its offerings can assume a certain level of competency and quality. When investing in potentially costly products where high quality is essential—like torque tools—ISO certification can be valuable proof of reliability.

ISO Standards Relevant to Torque Tool Manufacturers and Service Centers

The most relevant ISO standard for torque tool manufacturers is ISO 9001:2015. In addition, torque tool service centers and calibration laboratories should be guided by ISO 17025. The first standard, ISO 9001:2015, is the most current version of the ISO’s organizational quality assurance standards. These standards lay out best practices for repeatedly producing high-quality products. The standards also cover methods for testing the quality of products with multiple layers of quality control procedures. A company following this standard can be expected to produce each of its products at a consistent level of quality. In the case of torque tool manufacturers, tools produced under these standards will reliably deliver the torque amounts they are specified for.

Consistent quality control is just as important when manufacturing involves components that must be produced accurately and repeatedly. The same principles of documented processes, careful testing, and ongoing inspection can help manufacturers maintain dependable results across different production runs. These standards become particularly important when parts need to meet specific dimensions, material requirements, and performance expectations, since even small variations can affect the finished product.

With plastic injection moulding, manufacturers can apply controlled production methods while monitoring the quality of moulded components throughout the manufacturing process. Choosing a manufacturing partner that takes these quality requirements seriously can help maintain consistency from the initial design and tooling stages through to the finished parts, much like the quality systems used by torque tool manufacturers to ensure their products perform as specified.

Companies who purchase ISO certified tools can sleep easy knowing they will work as advertised. The second standard, ISO 17025, pertains explicitly to testing laboratories. This standard establishes guidelines for laboratory testing and calibration. Since torque tools must deliver precise amounts of torque, it’s important that they are calibrated well and often. Without in-house expertise and calibration equipment, it’s difficult or impossible for a company to know whether the service center they use is calibrating their tools correctly. So, seeking a center with ISO certification is a sound way to find a laboratory you can trust with your tools. 

Accurate testing and analytical procedures play an important role in maintaining product reliability across a wide range of industries. Access to dependable laboratory services helps organizations evaluate materials, verify performance, and maintain consistent quality standards through objective assessment.

As quality standards continue to evolve, experienced testing professionals and trusted laboratory resources remain important for compliance and decision-making. MAStest.com provides specialized testing and analytical services that help businesses make informed decisions based on objective data and thorough evaluation.

It’s relatively easy to check if a manufacturer or service center is ISO certified. Typically, these certifications will be displayed on a company’s website. If you don’t find the information there, call them and ask. Remember that certifications do expire, so be sure to look for certification dates. ISO certifications are points of pride for companies that earn them so they won’t hide the information. As you shop around for torque tools or consider your tool service options, check the company’s certification status for a few seconds. Knowing your tools are manufactured and serviced by a quality business will reduce your uncertainty about the quality of your products.

Mountz Service Centers

With 59 years of trusted expertise in torque manufacturing, Mountz stands as a beacon of reliability in torque calibration services. Our seasoned technicians boast unparalleled training, ensuring meticulous calibration and repair work with an unwavering commitment to quality control and safety standards.

Mountz features two calibration labs in the US and one lab in the UK. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

How to Select a Cleanroom or ESD Screwdriver for a Torque Application

In the intricate world of controlled manufacturing environments, where precision and cleanliness are paramount, the choice of tools plays a pivotal role. Dust, microbes, volatile organic compounds (VOCs), and pollutants are adversaries that must be meticulously managed in industries such as semiconductors, medical devices, aerospace and defense, and optics.

Cleanrooms, foreign object debris (FOD) control areas, clean facilities, light labs, ESD (static dissipative) spaces, laser laboratories, pharmaceuticals, and biologic facilities demand tools beyond conventional standards.

With the demand for cleanroom and ESD safe manufacturing, the need for torque tools that meet stringent requirements has increased. Finding the right tools for your cleanroom or ESD environment is as necessary as creating a sealed environment. Without the right tools, your cleanroom or ESD manufacturing application may soon be fouled by particulate contamination or zapped by electrostatic discharge produced during the manufacturing process, negating all the effort that went into purifying and preventing these costly damaging occurrences.

Learn valuable insights into the various torque screwdriver options available for cleanroom and ESD environments. These insights can help you make informed decisions and prevent costly damage to your manufacturing process.

What You Will Learn:

  • Knowledge of most common cleanroom and ESD type of torque screwdrivers
  • How cam-over technology prevents over-torque occurrences
  • Benefits of a tool with a wear-resistant internal seal to prevent grease leakage and minimize airborne contamination.
  • Learn about the cleaning regimen and process to maintain these tools
  • How an ESD tool prevents electrostatic discharge & maintains a static dissipative surface resistivity
  • How to ensure correct torque is consistently applied
  • Best practices to ensure a reliable fastened joint

View the Mountz torque webinar video

ESD and Cleanroom Environment Screwdrivers

Designed for an ESD-safe environment with sensitive electronic components and assemblies, the Mountz FG ESD screwdriver adheres strictly to IEC standards, safeguarding against electrostatic energy and ensuring the utmost protection for delicate electronics. Engineered for a cleanroom environment, the Mountz FG cleanroom screwdriver is manufactured using a high-grade, low-outgassing powder coat. The tools feature dynamic wear-resistant internal seals to prevent grease leakage and minimize airborne contamination.

Preset Torque Screwdrivers

Modern, effective preset torque screwdrivers are designed to ensure precision in your work. They improve productivity by consistently applying the correct torque value to each fastener. Preset torque screwdrivers are ideal for fastening applications where operators repeatedly assemble parts at the same torque setting. A preset screwdriver is similar to setting an alarm clock to signal the achievement of a selected time. The screwdriver is preset to the application’s required torque value. The tool signals once torque is achieved, reassuring you with accurate and consistent results.

A preset screwdriver doesn’t have an external torque adjustment scale. These tools have an internal torque adjustment mechanism for setting the torque value using a hex key and a torque analyzer. The locking mechanism prevents accidental torque setting changes. Once the tool is set, the screwdriver’s end cap is sealed with a calibration sticker and is ready to be used. However, if the preset torque value needs to be changed for a new fastening application, the flexible tool can easily be adjusted to a new preset torque value.

Adjustable Torque Screwdriver

An adjustable torque screwdriver can save manufacturers and maintenance workers time and money by allowing them to accurately tighten critical fasteners of different sizes—all with a single tool. Thanks to the externally adjustable torque setting on these tools, you can quickly switch torque values in the field or at the station, leading to improved productivity. A quality adjustable screwdriver has an easy adjustment process and a locking mechanism that prevents incidental torque adjustment.

Mountz torque screwdrivers deliver precision torque control, ensuring process reliability and efficiency. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

 

Tips for Selecting a Pulse Tool as an Alternative for an Impact Wrench

What is an impact wrench? It is a wrench that uses a discontinuous drive clutch system and compressed air to achieve torque. Impact wrenches are commonly used worldwide. They are often used to tighten lug nuts on cars for tire changes.

Impact wrenches, with their “hammering” design, are destructive by nature. Due to the lack of proper torque control, an impact wrench can easily damage parts and fastener threads. The wrench is not designed for torque control. The tool tends to either under- or over-tighten the fastening application.

The initial purchase of an impact wrench is inexpensive. Yet, the wrench is not ergonomically friendly to an operator, and an impact wrench requires a high maintenance budget. The wrench typically needs service multiple times each year. For fastening applications, a pulse tool will increase productivity and provide excellent ergonomics, reliability, and quality.

Pulse Tools

A pulse tool has the speed of an impact wrench with nearly the repeatability of a clutch-based shut-off torque tool. It contains precision-machined parts, and the pulse unit is a sealed chamber filled with a formulated hydraulic fluid. Pulse blades with a custom-designed precision roller push the fluid inside the rotating chamber, generating hydraulic pressure that produces torque. Air power is the power source that spins the anvil, and resistance against the fastener causes the pulse unit to activate. 

Key Reasons for Selecting a Safe Ergonomic Pulse Tool

  • Durability
  • Power & speed
  • Low noise decibels
  • Minimal vibration
  • Low torque reaction

Productivity of Pulse Tools

Pulse tools increase productivity and enhance product quality through precision torque control and user comfort. A lightweight pulse tool with more torque capability is ideal for an operator. A pulse tool with an excellent power-to-weight ratio will enhance the cycle time for the operator with a high-speed rundown. The Flex Power pulse tools, by Mountz Inc., feature a double chamber motor that allows the tool to reach the required torque and increase productivity quickly. The roller inside the pulse unit reduces friction, which increases power and allows the “pulse fluid” to last longer.

Ergonomics of Pulse Tools

The fluid inside the pneumatic pulse tool acts as a shock absorber, providing a robust, reactionless, vibration-free nut runner that is low in noise and highly ergonomic. A pulse tool is crafted for a quick rundown time, which reduces the operator’s exposure. Mountz FlexPower pulse tools are ergonomically safer than the harmful hammering and vibration of impact wrenches.

Durability of Pulse Tools

Due to the design of a pulse tool, there is no mechanical clutch or the conventional metal-to-metal hammering mechanism like an impact wrench that causes a short tool life and higher maintenance costs. Pulse tools are designed for durability and a long tool life.

Controlling torque is essential for companies to ensure their products’ quality, safety, and reliability aren’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently torqued can vibrate loose, and excessive torque can strip threaded fasteners. Using a quality pulse tool has become increasingly important for many companies to ensure proper torque is applied and maintain gauge requirements associated with the ISO 9001 Quality Standard.

The Mountz pneumatic pulse tools deliver reliable torque control, ensuring process reliability and efficiency. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Push-to-Start Electric Screwdrivers Increase Manufacturing Productivity & Efficiency

Electric screwdrivers are an effective solution for manufacturing engineers to mitigate manufacturing risks, low productivity, and high product scrap rates. As production demands ramp up, electric torque screwdrivers allow manufacturers to increase productivity, lower costs, and reduce product defects.

Power-driven screwdrivers provide precision torque control, improve production efficiency, and improve process reliability. These assembly tools are suitable for various special manufacturing needs and have two manual means of starting and operating them. The lever start tool requires the user to squeeze the screwdriver’s lever to operate it. A push-to-start tool requires the user to place light downward pressure on the nose of the screwdriver to activate its operation.

Ergonomics and User Comfort: Reduced Fatigue

The push-to-start electric screwdriver significantly alleviates operator fatigue. With its simple, natural pressing motion, this tool minimizes strain on the hand and wrist, providing comfort during extended use. This reduction in repetitive strain injuries can be a source of relief in industries that use tools daily, ensuring increased comfort and decreased downtime due to operator fatigue.

Efficiency and Productivity: Faster Cycle Times The push-to-start driver increases efficiency and productivity. The quick initiation mechanism of these assembly power tools allows for faster cycle times, allowing fastening tasks to be completed more rapidly than traditional tools. The speed advantage can save time, especially in high-volume production environments. Manufacturers achieve higher output and meet production demand more effectively.

Reduce Accidental Fastening Starts

The push-to-start driver is a key contributor to enhancing workplace safety. These tools require a deliberate pressing action to start, significantly reducing the likelihood of false fastening starts. Accidental starts can pose a safety hazard and lead to material waste or damage. By minimizing these risks, push-to-start drivers provide a sense of security, enhancing overall safety and reducing the chances of workplace injuries.

Benefits of Push-to-Start Electric Screwdrivers

  • Ergonomics and User Comfort
  • Consistent Torque and Precision
  • Fewer Accidental Starts
  • Improve Efficiency and Productivity

Faster than hand tools and more precise than air tools, electric screwdrivers are the smart choice for high-volume manufacturers who want to increase productivity and improve process control.

The Mountz electric screwdrivers deliver precision torque control, ensuring process reliability and efficiency. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Tips for Selecting a Preset or Adjustable Torque Screwdriver

There are various “Preset” and “Adjustable” torque screwdrivers, but selecting the correct hand screwdriver for your application depends on your process requirements. Preset torque screwdrivers are ideal for production applications where consistent torque is critical. Adjustable screwdrivers are suitable for fastening applications where quick torque setting adjustments are necessary for fasteners of different sizes.

Preset Torque Screwdrivers

Modern, effective preset torque screwdrivers are designed to ensure precision in your work. They improve productivity by consistently applying the correct torque value to each fastener. Preset torque screwdrivers are ideal for fastening applications where operators repeatedly assemble parts at the same torque setting. A preset screwdriver is similar to setting an alarm clock to signal the achievement of a selected time. The screwdriver is preset to the application’s required torque value. The tool signals once torque is achieved, reassuring you with accurate and consistent results.

A preset screwdriver doesn’t have an external torque adjustment scale. These tools have an internal torque adjustment mechanism for setting the torque value using a hex key and a torque analyzer. The locking mechanism prevents accidental torque setting changes. Once the tool is set, the screwdriver’s end cap is sealed with a calibration sticker and is ready to be used. However, if the preset torque value needs to be changed for a new fastening application, the flexible tool can easily be adjusted to a new preset torque value.

Adjustable Torque Screwdriver

An adjustable torque screwdriver can save manufacturers and maintenance workers time and money by allowing them to accurately tighten critical fasteners of different sizes—all with a single tool. Thanks to the externally adjustable torque setting on these tools, you can quickly switch torque values in the field or at the station, leading to improved productivity. A quality adjustable screwdriver has an easy adjustment process and a locking mechanism that prevents incidental torque adjustment.

Digital Scale vs Micrometer Scale System for Adjustable Screwdriver

A micrometer-scale tool requires you to fumble around and align the setting visually on small print-scale markings. The adjusting process is tedious. Recalibrating these tools is cumbersome and time-consuming, requiring testing various springs to bring the tool back into calibration.

A digital scale enhances your experience, as the torque setting adjustment process is quick and simple. You can easily convert between American, metric, and standard torque units. Digitally reprogramming the screwdriver makes the recalibration process more straightforward.

Mountz cam-over torque screwdrivers are the solution engineers select to prevent over-torque events. The cam-over technology provides an error-proofing process that consistently applies each fastener’s correct torque value.

Leaders in the aviation, automotive, medical, and electronic industries rely on the precision and accuracy of the FG  and FGA screwdrivers, in which process control is critical. A manufacturing engineer can give an FG or FGA tool to any operator to confidently deliver the correct torque time after time.

Mountz torque screwdrivers deliver precision torque control, ensuring process reliability and efficiency. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Improve Production Quality by Implementing a Screw Counting Process

Fastening regimes with multiple screws are susceptible to fastening failures such as cross-threading, cam-outs, stripped screws, omissions, and unfinished rundowns. A screw counting process is an error-prevention technique that allows an engineer to detect and eliminate costly screw-fastening errors during the assembly process.

Monitoring the fastening process allows production managers to correct fastening errors rather than waiting until the product reaches the quality inspection stage. Discovering a mistake in the later stages of the assembly line costs more in terms of rework time and expenses. This error-prevention solution improves productivity and reduces the scrap rate.

Fastener tracking devices count the number of screws delivered and detect and display fastening errors. These error-proofing devices can inform line workers or production supervisors in real time, who can correct the problem by completing the process or preventing the faulty product from being moved down the line. The screw counting process intends to ensure that all screws are accounted for during the assembly process. Using a screw counter is like putting the eyes and ears of a quality control manager where they are needed most – right in the assembly area.

Learn how to implement a screw counting process that allows you to verify that all fasteners were installed and tightened to the correct torque specification.

What You Will Learn:

  • How to detect cross-threading, cam-outs, missing screws, unfinished rundowns
  • Tactics to enable continuous monitoring of the fastening process
  • How to verify the fasteners are installed correctly
  • Ways to integrate with a machine & PLC interface for line control
  • Best practices to increase efficiency and reduce or eliminate rework and warranty costs

View the Mountz torque webinar video

The screw counter process improves production yields, manufacturing costs, product quality, product reliability, reputation, and profitability by ensuring that every assembly has been subjected to a quality control review process right in the assembly area. Learn more about implementing a screw counting process that allows you to verify that all fasteners were installed and tightened to the correct torque specification. 

Mountz smart screwdriver systems feature the screw counting technology. The Scout Screw Counter device is an accessory option that connects to an electric screwdriver to add the screw counting quality control program to the manufacturing process.

Mountz power tools equipped with screw counting technology improve process reliability and efficiency. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

A Guide for Selecting a Torque Tool Calibration Certificate

Calibration certificates play a pivotal role in ensuring the accuracy and reliability of torque measurement devices. Understanding the difference between accredited and non-accredited certifications is important, as the value and benefits of each certification type are essential for maintaining operational integrity, safety, and regulatory compliance.

What is a Calibration Certificate?
A calibration certificate attests that a torque tool or torque measurement device meets specified standards for accuracy and performance, either as requested by the customer or prescribed by the manufacturer. This certification is pivotal in automotive, aerospace, manufacturing, and construction sectors, where exact torque application is critical for operational integrity and safety.

ISO 17025-Accredited Calibration Certificate
An ISO 17025-accredited calibration certificate signifies that the torque tool meets internationally recognized standards for accuracy and reliability. This certification ensures workmanship quality, safety, and regulatory compliance. Unlike non-accredited certificates, ISO 17025 certification includes an ISO certification stamp and a statement of measurement uncertainty, enhancing the credibility and trustworthiness of the calibration.

Non-Accredited Calibration Certificate
A non-accredited calibration certificate assures users that the torque tool meets recognized accuracy and reliability standards. Although it follows the same calibration process as an accredited service, it lacks an ISO certification stamp and a statement of measurement uncertainty. Nonetheless, it is essential for ensuring workmanship quality, safety, and compliance with industry regulations.

Why Choose Accredited Calibration?
There are several reasons to opt for accredited calibration. Learn more about benefits for an accredited calibration from our white paper.

Download White Paper:  Understanding Calibration Certificates in Torque Measurement

With 60 years of trusted expertise in torque manufacturing, Mountz stands as a beacon of reliability in torque calibration services. Our seasoned technicians boast unparalleled training, ensuring meticulous calibration and repair work with an unwavering commitment to quality control and safety standards.

Mountz features two calibration labs in the US and one lab in the UK. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

How the Best Preset Torque Wrenches Make Assembly Lines More Productive

Manufacturing companies must meet high standards for product quality. Products manufactured on assembly lines must be identical. However, fastening every bolt in every product to the same degree is difficult, if not impossible, for an employee to do without mechanical aids. This variability in fastening results demands the intervention of a tool that can control the amount of torque it applies to a fastener—the torque wrench. Using a torque wrench, any employee can apply the exact amount of force a fastener needs every time.

That’s the basic idea. However, there’s more to it than that. Yes, employees fastening on assembly lines need to use torque wrenches to meet production standards consistently. But how do you find the best torque wrench to use on the assembly line? And why does it matter? What makes one torque wrench any better or worse than another?

How the Best Torque Wrenches Improve Process Control

First, why does it matter? The short answer: the competition. In a world where manufacturers vie for contracts and market share, the most efficient, effective factories will emerge victorious. They will secure the best contracts and dominate the market. In contrast, less efficient factories will struggle to attract desirable contracts and their products will lose market share. The least efficient factories may even struggle to sustain their business. This is where the use of the best torque wrenches can give you a competitive edge.  

Choosing the right torque wrench for an assembly is not just a matter of quality, it’s a strategic move that can significantly boost efficiency. Opting for preset wrenches over adjustable ones can streamline your production process. You’ll eliminate the time spent adjusting, checking, or resetting torque values, saving precious seconds per product. And when you’re churning out thousands of products a day, those seconds quickly add up, making your operation more efficient and productive.  

In addition, choosing the proper torque wrench can reduce the rate of lost product. Torque wrenches from reputable manufacturers are proven to deliver dependable results. The proper torque wrench will consistently deliver torque within its stated margin of error. Shoddy or poorly engineered torque wrenches may not do so. This increases the likelihood of inaccurate fastening, requiring additional quality assurance checks.  

Likewise, if you use lower-quality torque tools, you will need additional time for tool calibration checks. The more tools are found out of calibration, the less will be available for manufacturing. Additionally, standard practice is to halve calibration intervals for each tool found out of alignment. Testing must be conducted more frequently as more tools are found out of alignment. Repair or replacement costs will mount as well. As goes the adage: buy cheap, buy twice. 

How to Decide on the Best Preset Torque Wrench for Assembly Lines

In many ways, the best torque wrench for a given assembly line depends on the specifics of that assembly line. How large are the fasteners? What degree of accuracy is needed? Does the assembly require special characteristics, like insulation?  

There are currently three types of  mechanical preset torque wrenches on the market: click wrenches, break-over wrenches, and cam-over wrenches. Click wrenches provide power and can handle large fasteners. They alert their operator when torque is reached with an audible, “click.” 

Break-over wrenches can handle nearly any type of fastener head. The torque limiting tool typically deflects 20° or 90° on torque delivery which provides as visually indicator torque is achieved.

Engineered to prevent fastening failures, the cam-over torque wrench is a powerful tool that instills confidence in its user. It stops a fastener or bolt from being under- or over-tightened, ensuring the correct torque is delivered regardless of the task or the operator’s skill level.  

High-quality preset torque wrenches for assembly lines will meet all relevant national and international standards for calibration reliability. The best torque wrenches will exceed them.  

Mountz torque wrenches deliver precision torque control, ensuring process reliability and efficiency. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

How Often Do Torque Tools Require Calibration?

Which force has the most significant effect on our world? Gravity is a strong contender for top dog—it keeps you in your seat, your house on the ground, and the sun in the sky. However, another force affects our world nearly equally: entropy, gravity’s opposite. If gravity is the tendency things have to come together, entropy is the tendency they have to fall apart. It works to dissolve organization into chaos, reduces considerable complexities to small simplicities, and makes molehills of mountains. It’s the cobwebs in the corners, why your car won’t start, and why the tools you calibrated so carefully are already out of alignment. In short, if you’re creating something complex and precise—for instance, by using electric torque wrenches on an automotive assembly line—it’s not gravity you’re fighting. It’s entropy. 

Anyone who uses torque tools regularly is on the front lines of the struggle against entropy. Over time, these tools will eventually deliver more or less torque than intended. As a result, the fasteners they’re attaching may become too loose, allowing them to back off under stress or too tight, causing them to deform, shear, or otherwise break. Companies use torque tools to prevent either situation in the first place. When tools fall out of calibration, removing them from service is essential until they can be recalibrated to deliver the amount of torque they’re rated for. Even better is to catch entropy in the act by stopping these tools from going out of alignment in the first place. Here’s how.

Calibration Testing Intervals For Torque Tools

One way or another, as you use your torque tools, they will fall out of calibration. Use it and lose it, as the saying goes. That doesn’t mean there’s anything wrong with your tools or even that it’s a bad thing that they go out of calibration from time to time. It’s a natural part of life, a force of nature. However, the negative outcome is if you unknowingly use the tools to create defective or faulty products. At that point, you may be liable for product failure in the field and must deal with the repercussions. So, how do you prevent this from happening? The best way—really, the only way—to be certain your torque tools are in alignment when you use them is to test them regularly.  A tool that needs to be tested with each new fastener would be more trouble than it’s worth.

On the other hand, if you test your tool only once every few years, then if you find it out of calibration, you’ll have difficulty figuring out how long it has been that way and how many potentially defective products it has created in the meantime. As a general rule of thumb, it’s wise to test the calibration of your torque tools every six months or twelve months. That’s rare enough that it doesn’t impede productivity and often enough that it doesn’t create obscene liabilities. The organization that owns the tool must determine a suitable calibration frequency that meets its needs based on many factors, such as equipment performance history, application, degree of usage, and management objectives.

Naturally, tools that show visible signs of wear, such as old grease, worn parts, or loose screws, should be pulled from service and inspected as well. Tools found out of calibration should be flagged and retested at half the regular interval. While these general rules are helpful as guidelines, your operation’s specific calibration intervals will depend on the precision you need, the exact tools you’re using, the fasteners you’re working with, the criticality of your application, and potentially the legal requirements that govern your industry. To determine an appropriate testing regimen for your operation, consult with the manufacturer, your product’s design team, and other relevant parties, such as your legal team. Certain industries with especially low tolerances for risk may even require a daily torque verification test to ensure no faulty products are assembled.

Testing The Calibration Of Your Torque Tools

Fortunately, testing the calibration of your torque tools need not be an onerous or time-consuming procedure. There are two ways to run a testing regimen effectively. Either send your tools to a certified laboratory or test them and document the process yourself. Laboratories should be certified under ANSI/NCSL-Z540, ISO, or N.I.S.T. standards. Sending tools to an accredited laboratory is a preferred solution for companies using small to moderate numbers of torque tools. You must keep an inventory of tools, and workers should remove tools from service at the specified interval. The tools must then be packaged and shipped to the service center, where they will be tested, recalibrated if necessary, repackaged, and shipped back with appropriate documentation.

By using a laboratory, companies avoid the need to invest in and maintain testing and calibration equipment and devote internal resources to testing, calibrating, and documenting the process. Some operations, however, use so many torque tools or need to test them so regularly that it makes more sense to test their tools in-house. To do so, they rely on torque testers and torque sensors to detect and analyze the output of their tools. When they find tools out of alignment, they turn to calibration equipment to return them to proper working order.

Testing in-house eliminates the need for packing and shipping tools, which can significantly increase turnaround time. To do so, companies must invest in testing equipment and ensure their processes conform to national and international standards. Any company relying on torque tools must have a plan in place to ensure they remain in calibration. That plan will involve testing their tools at regular intervals, determined by the nature of their work. Testing can be accomplished either by sending tools to a certified laboratory or by testing and documenting calibration in-house. However it’s done, it will take regular and consistent attention to keep your tools in alignment and the force of entropy at bay.

Mountz torque analyzers and torque sensors are U.S. manufactured and engineered with Silicon Valley innovation and excellence. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.