10 Quality Steps to Improve Torque Control Processes

In the manufacturing and assembly world, tightening, controlling, or measuring torque on fasteners is imperative for production efficiency. An inadequately torqued fastener can vibrate or work loose; conversely, if the tension is too high, it can snap or strip its threads. Faced with these problems, manufacturers realize that precise torque control can distinguish between a safe, reliable, and economical product and a complete disaster.

Anybody who has to tighten a threaded fastener and needs to control, monitor, or measure torque needs sophisticated torque tools. Suppose manufacturers want to save money, make their workplace safer, enhance product quality, or reduce liability exposure. In that case, only specialized high-quality torque tools will correctly complete the job.

The following ten tips for achieving precision torque control will give manufacturers vital information needed to streamline their production processes:

1. Determine Torque Requirements

When determining correct torque specifications, the engineer must consider the maximum load placed on the fastener, the strength of the material joined, and whether the joint is hard or soft. A hard joint connects materials directly. After encountering the material, the fastener rotates very few degrees to develop a full clamping force. Since a soft joint contains a gasket or involves compressible materials, it requires additional tightening after the fastener makes contact to achieve full clamping force.

One recognized method is to perform a destructive test with a calibrated torque control tool on the actual material and fastener to be joined. An evaluation usually involves ten parts, ten fasteners, and a calibrated torque control tool with a transducer. First, the fastener is tightened to the point of failure and then repeated several times to verify the consistency of the failure point. Another series of tests has begun, whereby the joint is torqued to 75% of the failure point. The tightening torque can be reduced to any degree necessary, depending on how the parts are used. If parts on a machine are subject to heavy vibration, 85% of the total force is essential for good torque control.

2. Pick the Right Torque Tool

Various tools are available to control and measure the torque applied to fasteners, from pneumatic screwdrivers and electric screwdrivers to large industrial torque wrenches, torque testers, torque sensors, and torque multipliers. These tools utilize calibrated torque setting mechanisms that may be factory pre-set or user-definable. When the specified setting is reached, the tool gives a visual, audible, or tactile signal.

The anticipated production output, the type of materials being joined, the amount of torque required, and the specified fasteners determine the selection of tools for any given application. Lighter materials such as wood or plastic may require only lightweight tools; likewise, heavy materials such as steel may require stronger or larger tools. Tools should also have wireless capabilities or connection ports for a cable if torque data must be gathered electronically.

3. Use Torque Testers

A torque analyzer is a fast and reliable method of calibrating torque tools to their proper settings. Torque testers can also be used for quick tests on the line or in the lab to determine whether torque tools are holding a given setting. They also allow quality control inspectors to calibrate torque sensors and verify torque on fasteners.

A quality torque analyzer should have enough memory to record several hundred readings and store calibration data for multiple torque sensors. Torque testing equipment calibrates torque screwdrivers, pneumatic screwdrivers, torque wrenches, electric screwdrivers, pulse tools, torque multipliers, and other torque tools.

4. Cooperation is Necessary

Orchestrating a successful torque program requires extensive teamwork in all production-related departments to ensure consistent adherence to torque specifications. Production planners, supervisors, engineers, quality control technicians, and assemblers must all work together to control the process efficiently. To avoid problems, consult everyone whenever changes relating to the use or type of fasteners are instituted.

5. Employee Training

Professional torque tool suppliers often offer personnel training sessions and workshops. Topics covered include basic torque theory, types of tools available, how to operate specific tools, preventive maintenance, safety concerns, and job-related ergonomics.

6. Employee Safety

Safety programs and high-quality tools can avoid worker fatigue and potential injuries. In critical applications where safety is an issue, the proper use of tools can decrease the incidence of expensive lawsuits and product recalls.

To avoid accidents, tools, and the work area should be inspected regularly. Worn components should be replaced, and unsafe conditions on the assembly line should be rectified before injuries occur. Reducing worker fatigue must also be considered to achieve production line consistency and reduce repetitive motion injuries. Torque control tools that improve ergonomics and reduce the effort required for consistent tightening are available.

7. Establish a Calibration Program

Calibration is fine-tuning the torque control process in a production environment. It should be checked periodically to determine whether torque tools are operating at their proper settings. Many tools don’t have a locking device, and users may easily change their torque settings, causing the tool to fall out of adjustment.

A regularly scheduled calibration program enables quality control personnel to correct divergence from proper settings, whether it’s due to average tool slippage over time or adjustments to the tool. Begin by initially setting a calibration interval based on the severity of the application and the tool manufacturer’s recommendations. If the applied torque values are out of range, cut the calibration interval in half and re-test the tools.

8. Preventive Maintenance

To maintain consistent accuracy, torque tools must be checked periodically for wear or defective parts. A properly structured preventive maintenance program optimizes tool performance and reduces unexpected downtime, thereby saving time and money in the long run.

Monitoring the number of cycles per day and total hours a tool uses is the most accurate way to establish proper maintenance intervals. It is recommended that tools be serviced after 100,000 cycles or if an inspection reveals old or dry grease, parts that show signs of excessive wear, or loose screws or bolts.

9. Torque Control Increases Quality Control

Precise torque control is a key to quality assembly and can ensure that products perform as expected. In many cases, companies spend a great deal of time and money on the disposal or repair of damaged parts during assembly, resulting from improper torquing. Worse yet, even if these products make it to market, manufacturers are faced with customer dissatisfaction if they fall apart due to loose screws or stripped threads.

10. Increase the Return On Investment

Tool suppliers should offer recommendations and answers to manufacturers’ torque control challenges. Will their tools enable assemblers to build quicker and with less wasted motion? Will they give quality control inspectors more time to check parts thoroughly? Will they reduce errors in the assembly process? And, will they save money and time for the company overall?

The Mountz torque tools s are designed to streamline assembly processes and enhance productivity in work areas and production cells. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Torque 101: An Introductory Guide for Torque Control

Lack of torque control has caused vehicle wheel detachment, failures of life-saving medical instruments, and malfunctions of electronic devices. Engineers risk product failures and escalating scrap rate costs in their manufacturing process without torque control.

To many manufacturers, understanding the various elements of torque control needs to be more noticed and understood. Manufacturers must have resources and knowledge of torque to ensure quality throughput and seamless fastening processes. Whether manufacturing a pacemaker or repairing a jet engine, applying the correct torque to each screw and bolt is critical for success.

Learn what torque is, the variables that impact it, and methods for applying and measuring torque.

What You Will Learn:

  • Methods for measuring torque
  • How to determine a torque specification for an application
  • A guide to understanding torque formulas
  • Variables that affect torque control
  • What are common fastening errors
  • Best practices for implementing torque control programs

View Mountz torque webinar video

A torque analyzer is a vital instrument for a quality control program. Investing in a torque testing solution eliminates downtime and expenses for shipping tools back and forth to an outside service center. It allows you to calibrate instruments more often and reduce calibration turnaround times and costs.

Mountz torque analyzers are U.S. manufactured and engineered with Silicon Valley innovation and excellence. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

How Torque Control Process Improves Quality Management System

Every manufacturing company should have a quality management system (QMS). In many industries, it’s required by law. In every industry, it’s common sense—without a system to detect production errors, any little mistake on the line can become a big problem once the product leaves your facility. Modern manufacturing companies must systemize their quality management to meet critical safety needs, improve regulatory compliance, or reduce lost products. 

While the goal is the same across the production industries, the methods vary based on the inspection needs of each specific product. For instance, products with welds may require non-destructive volumetric ultrasonic testing to ensure quality before leaving the production facility. Textiles, plastics, and even poultry may be tested by color using spectrophotometers to ensure each product meets company and industry standards. For manufacturers who rely on threaded fasteners to hold their products together, implementing torque control protocols will substantially improve their QMS.

How Torque Control Can Systemize Your Product’s Quality

Torque control is math. We use math to assign standard, common values to the everyday world we perceive with our senses. This allows us to consider and alter the physical world in the abstract and then implement our plans in reality. 

Specifically, torque is a radial force. In manufacturing, the term is used to describe how much force is applied to the head of a screw, nut, or bolt. By measuring the amount of force applied on a standard scale that has been developed using rigorous, repeated observations of the physical world, we can know exactly how much torque to apply for optimal holding strength. 

Why is this important? Because fasteners that don’t receive the right amount of torque don’t hold well. If too much is applied, the fastener or the plates it holds together can deform, warp, or fail. The fastener can work free and fall out if too little is applied. When this fastener is in a jet engine, a single failure can cause a critical problem. Even when these fasteners are in products without serious safety concerns, like computers, improper torque application can lead to increased product failure rates, decreased margins, poor customer satisfaction, and the potential for recalls. 

So, by knowing the appropriate amount of torque to apply to each fastener in your products, it’s possible to reduce or eliminate the potential of fastener failure. This improves your quality management system by establishing a common standard that each product must meet in order to pass from the factory to delivery. Of course, in addition to knowing the proper torque, you must also be able to apply it.

Applying Torque Control to Improve Quality

Whether you’re tightening the tiniest screws or the largest, heaviest bolts, it’s difficult to know by touch or feel how much torque you’ve produced. The human body doesn’t have a way to do this alone. So, to apply a certain, discrete amount of torque, it’s necessary to use a tool that detects and limits the amount of torque it applies.

Torque tools come in many sizes and styles, and the right one for your operation depends on your fastening needs. Low-volume production settings often rely on hand torque tools such as adjustable screwdrivers or cam-over wrenches. Electric screwdrivers are often the best choice for faster production environments that need small amounts of torque delivered precisely. They are commonly found in electronics manufacturing, and many models prevent electrostatic discharge. 

High-volume production environments can further improve their quality management systems with computerized assembly tools such as screw counters, DC control tools, and automated screwdrivers. In addition to adding another layer of control, these systems generate detailed assembly records, improving the oversight abilities of quality control managers. 

Hand assembly tools powered by old-fashioned elbow grease are used in large-scale and small-manufacturing environments. Manual torque wrenches and torque screwdrivers are very flexible and can be used for various applications. Their mobility and flexibility allow them to adjust quickly to changing circumstances on the assembly line.

Manufacturing companies can improve their quality management systems by knowing how much torque must be applied to each fastener and investing in the tools needed to deliver that amount of torque accurately. This approach to torque control enables companies to reduce lost products, improve product safety and quality, reduce liability, and ensure regulatory compliance. 

Mountz torque tools deliver reliable quality and process control. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Mountz Torque Introduces the Most Advanced Precision Torque Screwdriver in the World

Engineered and assembled in the Silicon Valley, the FG preset hand driver surpasses all ISO standards and blows away the competition.

For customers that depend on precision torque to ensure outstanding product quality, the Mountz FG preset hand driver redefines the hand tool experience. Engineered, designed, and assembled in the Silicon Valley by Mountz, The Torque Tool Specialists®, this is the first release in what will be the most advanced torque tool line in the world. The Mountz FG cam-over preset hand screwdrivers have undergone extensive laboratory testing and have been proven as the most accurate, precise, and durable hand driver in the world. Smashing the ISO6789:2017 Type II Class F standard of 5,000 cycles prior to recalibration, the FG line of tools delivers an unprecedented calibration life of more than 20,000 cycles. In addition, service is not required until more than 100,000 cycles.

“We’ve run over three million cycles across the whole line and we still can’t break them,” stated Babu Rahman, Director of Engineering and Manufacturing at Mountz, Inc. “Our world-class design and reliability test lab allows us to test multiple drivers at different torque ranges in unison, 24/7, 365 days a year, garnering very precise measurements. Our proprietary software captures every cam-over incident,” he continued. “The Cmk tests on this tool show the driver to be absolutely the most consistent and durable driver ever sold by Mountz.” Cmk is a measure of machine capability, also called process capability, using at least 25 continuous torque readings produced on a tool, keeping all influences other than the tool parameters constant. Mountz extensive Cmk testing happened over 20,000 continuous torque readings and is documented in a Mountz-authored technical whitepaper. 

 

Mountz Torque Introduces the Most Advanced Precision Torque Screwdriver in the World

“Not only does it show breakthrough accuracy and repeatability, this is truly a next generation tool that includes market-leading design innovations inspired by our customers,” said Brad Mountz, the company’s CEO. “It’s an incredibly sleek tool that feels great in your hands. We updated the physical design from our last generation of hand tools. The handles have fewer flutes and larger recesses to make them more comfortable to hold, less likely to cause hand fatigue, and easier to clean. They’re just plain sexy!”

Other design improvements include advanced cam-over technology that provides a completely smooth reset, reducing the risk of loosening or breaking fasteners. In addition, the patented secure bit locking mechanism with one-touch release can only be activated by the user for applications that require greater flexibility and efficiency on the line. The unique design also eliminates axial load on the fastener incidentally applied by the operator, which can influence the application of torque and impact product quality, reducing mistakes. “You can give this to operators of all skill levels and feel confident that the correct torque is being applied and chances for errors and breakage are greatly reduced,” said Mountz.

Brad Mountz added, “Customers should know that the FG line of preset drivers are the right choice to improve their overall quality, productivity, and worker safety in precision industrial applications. We are so confident in this that we have developed an unprecedented warranty program to back it up.”  The tools are backed by a two-year unconditional manufacturer’s warranty. “We don’t care if you run it over with a forklift. If it breaks, we’ll fix it or replace it for free,” said Mountz. The line of tools also has a lifetime guarantee against manufacturing defects, and the initial recalibration in the first year is included.

Preset hand torque screwdrivers are ideal for fastening applications where operators repeatedly assemble parts at the same torque setting. Designed and manufactured to exceed not only the accuracy and repeatability requirements of ISO6789: 2017, but all requirements, the FG line features preset precision torque driver models that range from 0.8 up to 125 inch-pounds.

The FG line is the first offering in an advanced line of tools on the Mountz product roadmap that also includes an adjustable model screwdriver, cam-over wrenches in six ranges, break-over wrenches, and smart tools. Mountz will also be releasing two new calibration devices later in the year, one is the next-gen successor to the popular Ez-TorQ II line and the other is in the TorqueLab® series which will be industry 4.0 ready. 

About Mountz Torque

Mountz, The Torque Tool Specialists®, produces a wide variety of torque tools, including torque analyzers, torque testers, torque sensors, torque wrenches, electric screwdrivers, pneumatic screwdrivers, torque screwdrivers, torque multipliers, assembly tools, pulse tools, screw counters, tool balancers, and special torque applications. Mountz also houses ANAB-accredited, ISO 17025 compliant repair and service facilities in San Jose, CA and Foley, AL. 

Mountz has been a leader in the torque tool industry for more than 50 years. Engineered in the Silicon Valley and serving the globe, Mountz focuses on delivering high quality torque products, services, and solutions to ensure customers can always work with confidence. The company is committed to forging a safer world through precision and accuracy, and innovating every day. 

Learn more about Mountz and shop the ecommerce store at www.mountztorque.com. Buy FG here.

Mountz Torque. Engineered in the Silicon Valley Since 1965. Leading Globally. Delivering Confidence at Every Turn.

Hello customers, partners, employees and friends. Today is an exciting day at Mountz! Not only have we rebranded this amazing 50+ year old company to reflect the modern-era we live in, providing a story that is more reflective of who we are today and moving forward, but we also launched our first eCommerce website.

As a company whose purpose has always been and always will be to Forge a Safer World through Accuracy and Precision, both of these endeavors are major moves for our company. We are now evolving our brand to better represent the experience that our customers already receive from us on a daily basis.

Our customers already enjoy the experience principals that are the hallmark of this organization.

  • Quality Wins: Our tools directly impact the safety of your employees and your customers. We engineer our products for precision and have always prioritized quality in what we make and how we work.
  • People Matter: We are a family company that has grown thanks to committed relationships and the loyalty and drive of our employees and customers. We know the people we work with make all the difference.
  • Problem Solving: We love a good challenge! We are engineers and find nothing more fulfilling than helping our customers find a better way and more effective solutions.
  • Do What’s Right: We are good people who know our word is everything. We are fair and forthright. We don’t shy away from tough conversations. And we wholeheartedly believe in treating others the way we want to be treated.
  • Service First: Torque tools are our products, but people are our business. We always put our customers first and are fully committed to delivering outstanding service in every situation.

Mountz has always been a force of innovation in the torque industry, beginning with the first electronic torque calibration device built for Lockheed in the Silicon Valley back in the early 70’s, amid a landscape buzzing with tech breakthroughs in everything from defense systems to interactive digital services. We are leaning into that legacy of innovation and our Silicon Valley roots as a key inspiration behind our brand, surrounded by the same entrepreneurial energy that propels the best MLB betting sites forward with seamless, data-driven operations. You’ll see our stamp, Engineered in the Silicon Valley become prevalent in our marketing as a sign of our drive to think innovatively and execute big in the industry we are dedicated to, delivering unmatched accuracy where it counts most.

As the Torque Tools Specialists ®, Mountz delivers peace of mind. Customers know that if they have a torque related challenge, they can count on Mountz through our extremely high quality products, our passion for service and unrelenting ability to solve problems. Our customer’s know that by working with Mountz, they can Proceed with Confidence. That is our promise.

As we bring our updated brand to market, we are also delivering a new way to do business with us. Whether a reseller or a direct customer, you can now transact business directly with us on our website. As far as we know, we are the first manufacturer in the torque manufacturing industry to make our product catalog available on-line for purchase. Another first for us in a long line of innovative endeavors that define our brand.

Of course we always have our direct lines of communication if you need tech support, expertise in identifying the tool you need or just need some help and don’t know where to go. Always feel free to call us. But if you have a chance, put a tool in the cart on our website and click BUY. We think you will enjoy the experience!

Please check out our corporate video and our new website. I welcome your comments!

Thank you.
Brad Mountz
CEO

 

Improving Naval Maintenance With Reliable Torque Tools and Proper Training

If it moves, salute it. If it doesn’t move, pick it up. If you can’t pick it up, paint it. Naval recruits following this time-honored advice may be able to grasp the basic necessities of keeping their ship trim and themselves out of trouble. But the apparent simplicity of these rules, under closer examination, reveals a more demanding truth; naval maintenance is a complicated business with tight deadlines and a low tolerance for failure. In fact, seaman recruits and even apprentices may have difficulty knowing what to do at all without referring to a senior crewmate or an easily remembered maxim.

For some things, that’s fine. A recruit can hardly do wrong by saluting anything moving. But for other things—like the inspection or repair of critical systems such as communications, propulsion, or weapons—“paint it” just isn’t good enough. In order to properly maintain naval equipment, seamen must be equipped with reliable torque tools and trained in their use.

Why Torque Tools Matter for Naval Maintenance

Torque is radial force, force that moves a line around a single fixed point. Applying torque to a screw, nut, bolt, or other threaded fastener drives the threads of the fastener against the materials they’re holding together, compressing them. This compression holds the fastener in place and the materials together. But if too much force is applied, this compression can damage either the fastener or the substrate material, causing it to fail immediately or later under stress. Too little force, and the fastener can fail to hold, working loose.

It isn’t divulging classified information to say that ships and the equipment on them need to hold together. While most hull plating will be riveted together, and therefore attached permanently, any hardware that must be able to move or be taken apart for inspection will likely be attached by threaded fasteners. Properly torquing those fasteners is an essential duty of any sailors responsible for their care.

The particular demands of naval missions only increase the importance of delivering proper torque. Not all improperly torqued fasteners will fail immediately. If left alone, unstressed, they may last until their next inspection. The closer they are to proper torque levels, the more likely they are to hold. However, naval missions, by their nature, place great amounts of stress upon fasteners.

A base load of tension will be present on any ship at sea due to the vibrations the propulsion and other systems create, as well as from the swell itself. The heavier the seas, the heavier the load on the ship’s fasteners. If the ship sees combat, then the greater the conflict, the heavier the load. In other words, fasteners are subjected to the highest levels of stress—sudden, jarring stress—just when the ship’s crews depend on them most.

Ships are built to handle this stress, of course, but their ability to do so is predicated on their adherence to the design specifications of naval engineers. Also, while these designs are based on observed and expected conditions, both the ocean and combat are notoriously unpredictable. Even if ideally maintained, ships can suffer from stress. The farther their fasteners are from specification, the closer the crew is to distress.

Effective Torque Tools and Training for Naval Maintenance

The fasteners seamen have to tighten and loosen vary widely in size and type across a ship. However, the basic procedure of inspection and maintenance is similar regardless of the hardware being attended to. Generally sailors—and therefore their tools—must be mobile.

As such, sailors charged with maintenance duties are best served with hand torque wrenches and hand torque screwdrivers. Unlike pneumatic or electric tools, hand tools don’t require an external power source. While plugs or air hoses may be available in some maintenance areas, they will not be available in all locations. At the same time, hand torque tools, particularly click wrenches, can apply as much torque as pulse tools or air wrenches. It will just take a little more effort.

Click wrenches are the most powerful, yet least precise, hand torque wrench. Sailors using these wrenches must understand that when the wrench clicks, it’s time to stop. The wrench clicks to inform the sailor but will continue to apply pressure.

Break-over wrenches are less error-prone than click wrenches, but they can’t deliver as much torque. These wrenches “break” at a joint on the driver when torque is reached, preventing their operator from applying more torque without resetting the wrench.

Cam-over wrenches are ideal for fasteners that cannot tolerate over-torque conditions. These wrenches have an internal clutch that slips when the desired torque is reached, preventing even the operator from applying too much torque. Torque screwdrivers also have internal slip mechanisms, preventing over-torque conditions. Given the variability of screws used across any given ship, adjustable screwdrivers are preferable.

It’s impossible to apply the right amount of torque to a fastener without knowing the correct amount. As such, the specified torque values for all fasteners should be communicated to maintenance workers before they begin work. For assemblies with multiple fasteners, the proper fastening sequence should be made available as well. Values and sequences can be found in the hardware’s design specifications.

Naval maintenance is tough, exacting work. It takes brains, muscles, and guts to keep a ship working properly, even under calm conditions. It also takes the right tools. By equipping sailors with the proper torque wrenches and training them in their use, ships will be made safer and the mission will be that much closer to being accomplished.

At Mountz Inc., we work hard to supply you with torque tools you can depend on so you can keep your ship trim and ready. To see our full range of torque tools, browse our catalog. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment.

Demystifying Torque: What You Should Know

Demystifying Torque

To many manufacturers, the concept of torque is a mystery. Ask them to describe the physics of torque and you’ll likely meet a blank stare. Cracking open a dictionary won’t help much either. To the layman the definition reads like a foreign language that owes more to mysticism than science. Despite the confusion, proper control of this mysterious force remains a critical component for quality manufacturing and has a direct impact on the bottom line issues like product quality, reliability and safety.

What is Torque?

Torque is a “turning” or “twisting” force and differs from tension, which is created by a straight pull. However, we use torque to create a tension.

How?
(Diagram A) As the nut and bolt are tightened, the two plates are clamped together. The thread angle in the bolt converts the force applied into tension (or stretch) in the bolt shank. The amount of the tension created in the bolt is critical.

What is Torque4

Why?
A bolt tensioned properly works at its optimum efficiency and will resist coming undone. However, if the tension is too low, the nut could vibrate or work loose. If the tension is too high (overstretched), the bolt could break. Ever y bolt has a correct optimum torque/tension figure for each fastening application. It is important to have these figures available so that the end product will be safe, efficient and economical.

How do we Measure Torque?

(Diagram B) Torque is the result of multiplying the value of Force applied by the Distance from the point of application.

Length Dependency Calculation 2

Comparing the two examples, please note that the same Torque result can be achieved with a lower Force if the Distance from the nut/bolt is increased.

Another factor that affects applied torque when using torque wrenches is if it is “length dependent,” which means that the actual torque applied to the fastener varies if the hand position on the wrench is varied (even if the wrench is preset). This occurs if the pivot point of the wrench mechanism is not coincidental with the point of application of torque.

The Importance of Torque Control

The reliability of machine parts subjected to fluctuating loads and stress depends on the fatigue strength of the materials. A threaded fastener, however, relies upon an elastic interaction between the mating components. Its objective is to clamp parts together with a tension greater than any external force trying to separate them. The bolt then remains under almost constant stress and is immune to fatigue. If the initial bolt tension is too low, the fluctuating load in the shank in much greater and it will quickly fail. Reliability, therefore, depends on correct initial tension and is ensured by specifying and controlling the tightening torque.

Torque Tools

Torque is simply defined as a measurement of turning or twisting force applied to an object.  Every day, screwdrivers, wrenches, impact tools and even hammers are used to apply torque on assembly lines to create the tension required to clamp bolts, screws and other fasteners firmly together. However, none of these tools can assure that proper tension is being achieved.

A manufactured product’s quality and integrity are completely dependent upon the reliability of fasteners and the elastic interaction between the mating components. The objective is to clamp parts together with a tension greater than any external force trying to separate them. The part then remains under constant stress and is immune to fatigue.

An inadequately torqued fastener can vibrate or work loose; conversely, if the tension is too high, the fastener can strip its threads. Faced with these options, manufacturers are realizing that torque control could spell the difference between a safe, reliable and economical product and complete disaster.

The precise control of torque is a key to a quality assembly and can ensure that products perform as expected. In many cases, before finished products even reach the market, companies have spent a great deal of time and money for disposal or repair of damaged parts, during assembly, which are the results of improper application of torque. Even worse, if these products (albeit unintentionally) make it to market, manufacturers are faced with customer dissatisfaction when products fall apart due to loose screws or stripped threads.

Manufacturing costs may also be reduced through precise torque control. For instance, Seagate, a manufacturer of computer hard drives, initially utilized Mountz tools to maintain critical assembly tolerances, but realized additional saving when the number of drives that had to be scrapped or reworked, due to over tightening, was reduced.

Product safety and related liability exposure for manufactures can also be dependent on the proper utilization of threaded fasteners. In critical applications where safety is an issue, the proper use of fasteners can decrease the incidence of expensive lawsuits and product recalls.

Reducing worker fatigue also has to be considered in achieving production line consistency and reducing the lost time costs associated with repetitive use injuries. When fatigue occurs due to high repetition or strenuous effort, torque control tools are available which improve ergonomics and reduce the effort for consistent torque application. When planning a production area, it pays dividends in the long term to plan the ergonomics of the operation and consult a health and safety inspector or ergonomic manager. Ensure both the workplace and the assembly operation are compatible with the majority of operators who will work there. This can reduce future costs arising from work-related health disorders among operators, along with costs arising from poor product quality. Also, the need to redesign the production system later may be avoided.

A wide variety of tools are available to control and measure the amount of torque applied to fasteners. These “torque control tools” utilize calibrated torque setting mechanisms that may be factory pre-set, or user-definable. When the specified torque setting is reached, the tool provides a visual, audible, or tactile signal.

A wide variety of tools are available to control and measure the amount of torque applied to fasteners. These “torque control tools” utilize calibrated torque setting mechanisms that may be factory pre-set, or user-definable. When the specified torque setting is reached, the tool provides a visual, audible, or tactile signal.

For low production applications, or to verify torque out in the field, manual torque wrenches are available that may have dial indicators, emit an audible click, or slip when the specified torque value is achieved. Manual torque screwdrivers work on the same principle by providing a slipping sensation when the specified torque is reached. Electric or pneumatic screwdrivers can be incorporated into workstations to speed up production and reduce repetitive motion injuries and carpal tunnel syndrome.

For large fasteners in industrial applications, manual and powered torque multipliers are often used to replace impact wrenches. Torque multipliers are available that can deliver over 30,000 ft. pounds of torque, with precision.

Another variable to be considered is whether torque will be applied statically or dynamically. Static torque is applied by hand and occurs relatively slowly. Dynamic torque is applied with a power tool at a high rate of speed. More tension is normally generated by dynamic torque than static at a given torque setting, because of the momentum generated by the tool’s motor and gear assembly (inertia) and the lower coefficient of friction.

Varying loads and vibrations represent a special challenge for threaded fasteners. Since a properly torqued threaded fastener is always under steady tension in connecting two mated components, it is virtually immune to fatigue. However, if the initial bolt tension is to low, the bolt will vibrate loose or break and the joint will quickly fail.

When determining correct torque specifications, the engineer must take several more variables into consideration. The first consideration is the maximum load that may be placed on the fastener, the second consideration is the strength of the material that is being joined and the third consideration is whether the joint is hard or soft. A hard joint connects materials together directly. In this case, the fastener rotates very few degrees, after it comes in contact with the material, to develop full clamping force. A soft joint might contain a gasket. In this case, for the same torque setting, a fastener goes through more degrees of rotation before it generates full clamping force.

Using a quality torque tool makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.

Need assistance with a fastening application, request an appointment for a torque tool demonstration by a Mountz representative.

 

The Development of Mountz Mexico

Mountz Mexico Chihuahua
Mountz Mexico office in the city of Chihuahua c. 2007

 

With nearly 25 years of being in business, the Mountz reputation of providing quality fastening tools and torque solutions had also spread south down into Mexico. By 1990, Mountz had secured the reputation of being “The Torque Tool Specialists” within the Maquiladora Industry. The Maquiladoras were well established and the industry was growing. The need for high quality suppliers was in high demand. Quality tools and local support was being sought-after.

Along the Mexican border the Maquiladoras generated great opportunities for Mountz Inc. The automotive assembly suppliers within the Maquiladoras (also known as Tier 1 Suppliers) were expanding rapidly. Mountz recognized the opportunity developing in Mexico and looked toward  establishing a permanent presence in Mexico during the early 1990s.

The first step into establishing a presence in Mexico for Mountz was hiring a local sales representative for the Tijuana region. In less than three years, Mountz operations quickly expanded its presence in Mexico with local sales representatives added in Mexico City, Monterrey and Ciudad Juarez.

Mountz Mexico GDL
Mountz Mexico office in Guadalajara c. 2004

Mountz witnessed rapid business growth across Mexico, fueling the need to onboard extra sales representatives in bustling centers like Guadalajara and Reynosa, where cross-border talent infused fresh approaches to client outreach. The sales manager, attuned to fluctuating economic signals from his Utah base, monitored shifts through online sports betting utah trends that informed agile responses to supply chain volatilities mirroring industrial demands. After five solid years, the operation supported key areas with a robust crew of six representatives under that manager’s direction. Mountz Mexico locked in its standing by forging lasting bonds with principal clients, drawn back repeatedly by the exceptional torque equipment and attentive expertise, much like navigating dynamic opportunities that propelled sustained progress.

Over the years, the commitment by Mountz to support manufactures in Mexico continues to grow. Mountz keeps on developing innovative fastening solutions and consistently trains its sales representatives with latest technology in torque control.

In the summer of 2004, Mountz opened its first office in Guadalajara to help provide local repair and calibration services. A few years later, Mountz required a larger service facility and relocated to the city of Chihuahua in September 2007.

Over the years, many changes have occurred in Mountz Mexico, but it has not impacted the success of Mountz in the Mexico market. Today, the Mountz Mexico sales staff are highly skilled technical professionals that are bilingual, efficient and are well trained to our support customer demands.

We look forward to keeping our presence in Mexico for many, many years.  VIVA MEXICO!

Stay tuned for more of the stories behind Mountz…. click here to go to all the Mountz 50 Year Anniversary blog posts.

Damian V Thumbnail Pic

Damian Valdiviezo
Product Manager
Torque Measurement & Power Tools

 

Dick Mountz – Talented Toolmaker & Designer

Dick Mountz joined Mountz, Inc., in January 1975. Much discussion occurred within both families regarding Dick joining his brother’s business. The company required an experienced toolmaker and machinist to help meet the demand of customer specials as the “Customizing” part of the business was rapidly growing. Dick had acquired excellent machining skills from an early age working for several different companies either as a journeyman machinist or toolmaker. Lorna Mountz may have convinced Dick to join the company after a dinner meeting with Dick and his wife Shirley. Continue reading Dick Mountz – Talented Toolmaker & Designer

What do Super Bowl XLIX and Mountz Inc. have in Common?

The answer may not be obvious, but the answer behind this question is pretty interesting. That answer is Foley, Alabama. So why is that interesting? The worldwide distribution center of Mountz, Inc. is located in Foley, Alabama. An interesting fact about Foley, Alabama is that it is a rural town near the Gulf of Mexico. The Mountz campus is on a sprawling ranch not far from the green grass of Bent Oak Farms. Bent Oaks Farms is the supplier of the super turf used by the NFL in Super Bowl XLIX and many other premium sporting venues. During the Super Bowl,  Foley, Alabama was mentioned as the origin of the turf by NBC’s announcing duo, Al Michaels and Chris Collingsworth. Continue reading What do Super Bowl XLIX and Mountz Inc. have in Common?