10 Quality Steps to Improve Torque Control Processes

In the manufacturing and assembly world, tightening, controlling, or measuring torque on fasteners is imperative for production efficiency. An inadequately torqued fastener can vibrate or work loose; conversely, if the tension is too high, it can snap or strip its threads. Faced with these problems, manufacturers realize that precise torque control can distinguish between a safe, reliable, and economical product and a complete disaster.

Anybody who has to tighten a threaded fastener and needs to control, monitor, or measure torque needs sophisticated torque tools. Suppose manufacturers want to save money, make their workplace safer, enhance product quality, or reduce liability exposure. In that case, only specialized high-quality torque tools will correctly complete the job.

The following ten tips for achieving precision torque control will give manufacturers vital information needed to streamline their production processes:

1. Determine Torque Requirements

When determining correct torque specifications, the engineer must consider the maximum load placed on the fastener, the strength of the material joined, and whether the joint is hard or soft. A hard joint connects materials directly. After encountering the material, the fastener rotates very few degrees to develop a full clamping force. Since a soft joint contains a gasket or involves compressible materials, it requires additional tightening after the fastener makes contact to achieve full clamping force.

One recognized method is to perform a destructive test with a calibrated torque control tool on the actual material and fastener to be joined. An evaluation usually involves ten parts, ten fasteners, and a calibrated torque control tool with a transducer. First, the fastener is tightened to the point of failure and then repeated several times to verify the consistency of the failure point. Another series of tests has begun, whereby the joint is torqued to 75% of the failure point. The tightening torque can be reduced to any degree necessary, depending on how the parts are used. If parts on a machine are subject to heavy vibration, 85% of the total force is essential for good torque control.

2. Pick the Right Torque Tool

Various tools are available to control and measure the torque applied to fasteners, from pneumatic screwdrivers and electric screwdrivers to large industrial torque wrenches, torque testers, torque sensors, and torque multipliers. These tools utilize calibrated torque setting mechanisms that may be factory pre-set or user-definable. When the specified setting is reached, the tool gives a visual, audible, or tactile signal.

The anticipated production output, the type of materials being joined, the amount of torque required, and the specified fasteners determine the selection of tools for any given application. Lighter materials such as wood or plastic may require only lightweight tools; likewise, heavy materials such as steel may require stronger or larger tools. Tools should also have wireless capabilities or connection ports for a cable if torque data must be gathered electronically.

3. Use Torque Testers

A torque analyzer is a fast and reliable method of calibrating torque tools to their proper settings. Torque testers can also be used for quick tests on the line or in the lab to determine whether torque tools are holding a given setting. They also allow quality control inspectors to calibrate torque sensors and verify torque on fasteners.

A quality torque analyzer should have enough memory to record several hundred readings and store calibration data for multiple torque sensors. Torque testing equipment calibrates torque screwdrivers, pneumatic screwdrivers, torque wrenches, electric screwdrivers, pulse tools, torque multipliers, and other torque tools.

4. Cooperation is Necessary

Orchestrating a successful torque program requires extensive teamwork in all production-related departments to ensure consistent adherence to torque specifications. Production planners, supervisors, engineers, quality control technicians, and assemblers must all work together to control the process efficiently. To avoid problems, consult everyone whenever changes relating to the use or type of fasteners are instituted.

5. Employee Training

Professional torque tool suppliers often offer personnel training sessions and workshops. Topics covered include basic torque theory, types of tools available, how to operate specific tools, preventive maintenance, safety concerns, and job-related ergonomics.

6. Employee Safety

Safety programs and high-quality tools can avoid worker fatigue and potential injuries. In critical applications where safety is an issue, the proper use of tools can decrease the incidence of expensive lawsuits and product recalls.

To avoid accidents, tools, and the work area should be inspected regularly. Worn components should be replaced, and unsafe conditions on the assembly line should be rectified before injuries occur. Reducing worker fatigue must also be considered to achieve production line consistency and reduce repetitive motion injuries. Torque control tools that improve ergonomics and reduce the effort required for consistent tightening are available.

7. Establish a Calibration Program

Calibration is fine-tuning the torque control process in a production environment. It should be checked periodically to determine whether torque tools are operating at their proper settings. Many tools don’t have a locking device, and users may easily change their torque settings, causing the tool to fall out of adjustment.

A regularly scheduled calibration program enables quality control personnel to correct divergence from proper settings, whether it’s due to average tool slippage over time or adjustments to the tool. Begin by initially setting a calibration interval based on the severity of the application and the tool manufacturer’s recommendations. If the applied torque values are out of range, cut the calibration interval in half and re-test the tools.

8. Preventive Maintenance

To maintain consistent accuracy, torque tools must be checked periodically for wear or defective parts. A properly structured preventive maintenance program optimizes tool performance and reduces unexpected downtime, thereby saving time and money in the long run.

Monitoring the number of cycles per day and total hours a tool uses is the most accurate way to establish proper maintenance intervals. It is recommended that tools be serviced after 100,000 cycles or if an inspection reveals old or dry grease, parts that show signs of excessive wear, or loose screws or bolts.

9. Torque Control Increases Quality Control

Precise torque control is a key to quality assembly and can ensure that products perform as expected. In many cases, companies spend a great deal of time and money on the disposal or repair of damaged parts during assembly, resulting from improper torquing. Worse yet, even if these products make it to market, manufacturers are faced with customer dissatisfaction if they fall apart due to loose screws or stripped threads.

10. Increase the Return On Investment

Tool suppliers should offer recommendations and answers to manufacturers’ torque control challenges. Will their tools enable assemblers to build quicker and with less wasted motion? Will they give quality control inspectors more time to check parts thoroughly? Will they reduce errors in the assembly process? And, will they save money and time for the company overall?

The Mountz torque tools s are designed to streamline assembly processes and enhance productivity in work areas and production cells. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

How Torque Control Process Improves Quality Management System

Every manufacturing company should have a quality management system (QMS). In many industries, it’s required by law. In every industry, it’s common sense—without a system to detect production errors, any little mistake on the line can become a big problem once the product leaves your facility. Modern manufacturing companies must systemize their quality management to meet critical safety needs, improve regulatory compliance, or reduce lost products. 

While the goal is the same across the production industries, the methods vary based on the inspection needs of each specific product. For instance, products with welds may require non-destructive volumetric ultrasonic testing to ensure quality before leaving the production facility. Textiles, plastics, and even poultry may be tested by color using spectrophotometers to ensure each product meets company and industry standards. For manufacturers who rely on threaded fasteners to hold their products together, implementing torque control protocols will substantially improve their QMS.

How Torque Control Can Systemize Your Product’s Quality

Torque control is math. We use math to assign standard, common values to the everyday world we perceive with our senses. This allows us to consider and alter the physical world in the abstract and then implement our plans in reality. 

Specifically, torque is a radial force. In manufacturing, the term is used to describe how much force is applied to the head of a screw, nut, or bolt. By measuring the amount of force applied on a standard scale that has been developed using rigorous, repeated observations of the physical world, we can know exactly how much torque to apply for optimal holding strength. 

Why is this important? Because fasteners that don’t receive the right amount of torque don’t hold well. If too much is applied, the fastener or the plates it holds together can deform, warp, or fail. The fastener can work free and fall out if too little is applied. When this fastener is in a jet engine, a single failure can cause a critical problem. Even when these fasteners are in products without serious safety concerns, like computers, improper torque application can lead to increased product failure rates, decreased margins, poor customer satisfaction, and the potential for recalls. 

So, by knowing the appropriate amount of torque to apply to each fastener in your products, it’s possible to reduce or eliminate the potential of fastener failure. This improves your quality management system by establishing a common standard that each product must meet in order to pass from the factory to delivery. Of course, in addition to knowing the proper torque, you must also be able to apply it.

Applying Torque Control to Improve Quality

Whether you’re tightening the tiniest screws or the largest, heaviest bolts, it’s difficult to know by touch or feel how much torque you’ve produced. The human body doesn’t have a way to do this alone. So, to apply a certain, discrete amount of torque, it’s necessary to use a tool that detects and limits the amount of torque it applies.

Torque tools come in many sizes and styles, and the right one for your operation depends on your fastening needs. Low-volume production settings often rely on hand torque tools such as adjustable screwdrivers or cam-over wrenches. Electric screwdrivers are often the best choice for faster production environments that need small amounts of torque delivered precisely. They are commonly found in electronics manufacturing, and many models prevent electrostatic discharge. 

High-volume production environments can further improve their quality management systems with computerized assembly tools such as screw counters, DC control tools, and automated screwdrivers. In addition to adding another layer of control, these systems generate detailed assembly records, improving the oversight abilities of quality control managers. 

Hand assembly tools powered by old-fashioned elbow grease are used in large-scale and small-manufacturing environments. Manual torque wrenches and torque screwdrivers are very flexible and can be used for various applications. Their mobility and flexibility allow them to adjust quickly to changing circumstances on the assembly line.

Manufacturing companies can improve their quality management systems by knowing how much torque must be applied to each fastener and investing in the tools needed to deliver that amount of torque accurately. This approach to torque control enables companies to reduce lost products, improve product safety and quality, reduce liability, and ensure regulatory compliance. 

Mountz torque tools deliver reliable quality and process control. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Appropriate Torque Verification Devices and Procedures for Medical Manufacturing

Medical devices sold in the United States are subject to some of the most stringent manufacturing requirements in the world. Guidelines for every stage, from establishment registration to labeling, are detailed in U.S. Food & Drug Administration (FDA) regulations. Inspections are regularly conducted to enforce FDA regulations, and fiduciary penalties are levied for noncompliance.

In order to profitably manufacture medical devices with fasteners for sale in the U.S., companies must understand:

  • The classification level of their device
  • Regulations applying to their device
  • The appropriate amount of torque for each fastener
  • Reliable and reportable methods for torque delivery
  • Reportable means of quality assessment
  • Calibration and service needs of torque tools

To help manufacturers successfully create medical devices, we’ve prepared a short guide to appropriate torque verification devices and procedures for medical manufacturing.

Standards and Regulations Applying to Torque Application in Medical Manufacturing

The FDA would rather companies follow proper procedures than litigate against companies for noncompliance. As such, their standards and regulations are published freely online, easily accessible to legal and lay professionals. Manufacturers of medical devices must familiarize themselves with these regulations as applicable to their operations and proceed under their guidance.

In order to produce and sell medical devices in the U.S., manufacturers must:

  • Register their establishment
  • List their device with the FDA
  • File a premarket notification or obtain a premarket approval
  • Establish a quality assurance system
  • Accurately label devices
  • Create incident reporting procedures

To ensure your operation complies with FDA regulations, consult with qualified and experienced legal counsel. Legal counsel can register your establishment, list your devices, file notifications for approval, and detail appropriate labeling and incident reporting guidelines.

Your legal counsel will also help establish guidelines for your quality assurance system. However, in order to translate regulatory requirements into physical devices and practices, you’ll need to rely on the expertise of qualified engineers. Your engineers will determine proper torque values for each of your fasteners, in addition to reliable and reportable delivery methods. To make an informed decision about the devices and processes you’ll need, start with the basics—your product.

Classifications of Medical Devices

Medical devices are classified into three primary groups: Class I, II, and III. Manufacturing requirements are least stringent for Class I products and most stringent for Class III products. Devices are classified according to their intended and indicated uses, as well as any risk they pose. The greater a device’s potential to cause harm, the stricter the requirements which govern its creation.

You can determine the classification of your device by searching for its type in the FDA’s product database. Or, you can search for your device by its classification panel, which narrows your query to the appropriate medical specialty. Once you’ve determined your product’s classification, you’ll know which regulations apply to your manufacturing process.

Understanding your device’s classification isn’t just a bureaucratic step—it directly shapes how you approach everything from design and testing to labeling and marketing. Each class comes with its own set of quality controls, documentation requirements, and review processes, so getting it right early on can save both time and costly redesigns down the road.

For example, a medical device designed for dermatology might include tools for diagnosing skin conditions, equipment for performing minor procedures, or technology for laser treatments. These devices must meet all applicable regulatory standards to ensure safety and effectiveness, and you can buy good ones from Amtech Medical, which offers options tailored to various clinical needs. By selecting equipment from reputable suppliers, practitioners can focus on delivering quality patient care while maintaining compliance with the relevant requirements.

Establishing Compliant Quality Assurance Systems

Instead of dictating manufacturing methods each company must use, the FDA has opened space for production innovation by stating certain qualities each system must know. Simply put, they’ve prescribed the ends, but not the means.

Depending on the specific nature of the devices a facility is manufacturing, the manufacturing process will be subject to different requirements. To understand the requirements your device is subject to, review the FDA’s Design Control Guidance. It includes topics such as appropriate practices for risk management, device reliability, and device durability.

Torque Control in Medical Manufacturing

If your medical device requires fasteners, you will need to determine, apply, and verify appropriate amounts of torque for each fastener. Depending on the classification of your device, more rigorous standards for repeatability may apply. Consult the product database to find the standards that apply to your product, then choose the proper tooling and verification devices to efficiently create your product within acceptable standards.

Choose your torque tools based on the needs of your product. Find the torque range you need your tools to deliver, the specificity stipulated by your engineers and legal counsel, and the rapidity needs of your assembly.

Torque Verification Devices for Medical Manufacturing

Hand tools, like break-over wrenches and cam-over wrenches, deliver small amounts of torque at slow to moderate speeds, with high specificity. Hand torque screwdrivers enhance the user experience during the fastening process. These tools deliver precise torque control and prevent a fastener or bolt from being tightened too much or too little. Hand torque screwdrivers are available in both preset and adjustable configurations.

DC control electric screwdrivers, while more expensive than hand tools, deliver precise torque amounts at high speeds. Multiple screwdrivers can be connected to the same automated control system and programmed to fasten complex sequences. This connectivity allows for simple data collection. The speed and efficiency of DC control electric screwdrivers make them ideal for high-paced production environments.

For sensitive medical devices under extremely strict manufacturing guidelines, clean room screwdrivers may be required. Clean room screwdrivers are designed to emit as little airborne particulate matter as possible, maintaining dust-free air for the most delicate assemblies.

Service and Calibration for Medical Manufacturing Torque Tools

To maintain compliance and repeatable product quality, torque tools must be regularly calibrated and serviced. The minimum calibration interval for most torque tools is six months. However, depending on the classification of your device, your quality assurance system may demand more frequent tool inspections, calibrations, and preventative maintenance. Some assemblies require testing before each use.

To calibrate and service your torque tools, you can invest in varying levels of calibration equipment and certification. If you want to fulfill further requirements, you can supplement your internal program with the aid of a certified service center. To begin building an internal calibration regimen, you will need to invest in torque testing equipment to diagnose your tool’s condition.

If you are calibrating tools in-house, you can hire or train certified technicians and procure calibration equipment. Alternatively, send your tools to qualified service centers, which can handle nearly any calibration need and often have expedited service programs. However you calibrate your tools, though, you’ll need to record the process and provide complete documentation for FDA inspections.

To successfully create and market medical devices in the United States, your operational procedures must be specific and impeccable, in compliance with every guideline. Knowing the regulations and how they apply to your products is essential for every manufacturer. Any device which requires fasteners must be built with the proper tools, to carefully designed specifications. The customers of your medical devices accept no less.

At Mountz Inc., we’ve been providing precise and efficient tools which meet and exceed the manufacturing requirements of the medical industry for decades. To view our full line of products, download our catalog. To inquire about price, request a quote. To ask a question, contact us today. To request a demonstration, schedule an appointment.