How Often Do Torque Tools Require Calibration?

Which force has the most significant effect on our world? Gravity is a strong contender for top dog—it keeps you in your seat, your house on the ground, and the sun in the sky. However, another force affects our world nearly equally: entropy, gravity’s opposite. If gravity is the tendency things have to come together, entropy is the tendency they have to fall apart. It works to dissolve organization into chaos, reduces considerable complexities to small simplicities, and makes molehills of mountains. It’s the cobwebs in the corners, why your car won’t start, and why the tools you calibrated so carefully are already out of alignment. In short, if you’re creating something complex and precise—for instance, by using electric torque wrenches on an automotive assembly line—it’s not gravity you’re fighting. It’s entropy. 

Anyone who uses torque tools regularly is on the front lines of the struggle against entropy. Over time, these tools will eventually deliver more or less torque than intended. As a result, the fasteners they’re attaching may become too loose, allowing them to back off under stress or too tight, causing them to deform, shear, or otherwise break. Companies use torque tools to prevent either situation in the first place. When tools fall out of calibration, removing them from service is essential until they can be recalibrated to deliver the amount of torque they’re rated for. Even better is to catch entropy in the act by stopping these tools from going out of alignment in the first place. Here’s how.

Calibration Testing Intervals For Torque Tools

One way or another, as you use your torque tools, they will fall out of calibration. Use it and lose it, as the saying goes. That doesn’t mean there’s anything wrong with your tools or even that it’s a bad thing that they go out of calibration from time to time. It’s a natural part of life, a force of nature. However, the negative outcome is if you unknowingly use the tools to create defective or faulty products. At that point, you may be liable for product failure in the field and must deal with the repercussions. So, how do you prevent this from happening? The best way—really, the only way—to be certain your torque tools are in alignment when you use them is to test them regularly.  A tool that needs to be tested with each new fastener would be more trouble than it’s worth.

On the other hand, if you test your tool only once every few years, then if you find it out of calibration, you’ll have difficulty figuring out how long it has been that way and how many potentially defective products it has created in the meantime. As a general rule of thumb, it’s wise to test the calibration of your torque tools every six months or twelve months. That’s rare enough that it doesn’t impede productivity and often enough that it doesn’t create obscene liabilities. The organization that owns the tool must determine a suitable calibration frequency that meets its needs based on many factors, such as equipment performance history, application, degree of usage, and management objectives.

Naturally, tools that show visible signs of wear, such as old grease, worn parts, or loose screws, should be pulled from service and inspected as well. Tools found out of calibration should be flagged and retested at half the regular interval. While these general rules are helpful as guidelines, your operation’s specific calibration intervals will depend on the precision you need, the exact tools you’re using, the fasteners you’re working with, the criticality of your application, and potentially the legal requirements that govern your industry. To determine an appropriate testing regimen for your operation, consult with the manufacturer, your product’s design team, and other relevant parties, such as your legal team. Certain industries with especially low tolerances for risk may even require a daily torque verification test to ensure no faulty products are assembled.

Testing The Calibration Of Your Torque Tools

Fortunately, testing the calibration of your torque tools need not be an onerous or time-consuming procedure. There are two ways to run a testing regimen effectively. Either send your tools to a certified laboratory or test them and document the process yourself. Laboratories should be certified under ANSI/NCSL-Z540, ISO, or N.I.S.T. standards. Sending tools to an accredited laboratory is a preferred solution for companies using small to moderate numbers of torque tools. You must keep an inventory of tools, and workers should remove tools from service at the specified interval. The tools must then be packaged and shipped to the service center, where they will be tested, recalibrated if necessary, repackaged, and shipped back with appropriate documentation.

By using a laboratory, companies avoid the need to invest in and maintain testing and calibration equipment and devote internal resources to testing, calibrating, and documenting the process. Some operations, however, use so many torque tools or need to test them so regularly that it makes more sense to test their tools in-house. To do so, they rely on torque testers and torque sensors to detect and analyze the output of their tools. When they find tools out of alignment, they turn to calibration equipment to return them to proper working order.

Testing in-house eliminates the need for packing and shipping tools, which can significantly increase turnaround time. To do so, companies must invest in testing equipment and ensure their processes conform to national and international standards. Any company relying on torque tools must have a plan in place to ensure they remain in calibration. That plan will involve testing their tools at regular intervals, determined by the nature of their work. Testing can be accomplished either by sending tools to a certified laboratory or by testing and documenting calibration in-house. However it’s done, it will take regular and consistent attention to keep your tools in alignment and the force of entropy at bay.

Mountz torque analyzers and torque sensors are U.S. manufactured and engineered with Silicon Valley innovation and excellence. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment. To get the latest torque-related news, follow us on LinkedIn.

Mountz Torque Video Webinar: Learn How to Identify When a Torque Tool is Falling Out of Calibration

Mountz, The Torque Tool Specialists®, hosted a torque webinar regarding nagging quality issues that manufacturers look to resolve daily or weekly. How to detect when a tool starts to drift out of calibration?

Every industry which relies on torque tools do so for the same reason: accuracy and repeatability matters.  Whether it’s in a ventilator, a satellite, or the heat exchanger of a nuclear submarine, a bolt or screw that is too loose could fall out.

Over time, torque tools will eventually end up delivering more or less torque than they are intended to. As a result, the fasteners they’re attaching may end up too loose, allowing them to back off under stress, or too tight, causing them to deform, shear, or otherwise break.

At that point, you may be liable for product failure in the field and will have to deal with the repercussions. So, how do you prevent this from happening? The best way—really, the only way—to be certain your torque tools are not falling out of tolerance when you use them is to test and verify the tools, regularly.

Keeping tools in calibration requires frequent torque verification. This is not because tools frequently go out of calibration. Instead, it’s because when tools do go out of calibration, it’s difficult to notice when it occurred and how long tools were used out of calibration.

Torque measurement is a key component of any quality control process. Learn the key benefits of conducting a routine torque verification process with your assembly tools.

What You Will Learn:

  • Why torque verification is a necessary quality control process
  • Ways to plan & schedule torque verification process
  • Tactics for conducting a simple, routine torque verification process
  • How to identify a tool is out calibration
  • Best practices for monitoring tool calibration daily or weekly to help reduce product liability

Here’s your chance to learn how to improve quality by quickly and accurately verifying the torque output on your tools.

Register today and download the Mountz Torque webinar video. Take it when it’s convenient for you.

Mountz, Inc. can help your company increase safety and reduce costs with our full line of torque analyzers and sensors. To see our full range of products, shop our store. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment.

Measuring Torque Output for Electric Screwdrivers

An electric torque screwdriver is a precision torque control instrument and should be handled with care at all times. There are different methods for testing the torque output of an electric screwdriver. Each method has a key purpose. The video below provides a brief overview of the different methods.

In a calibration lab, you want to set the torque and verify the repeatability of the tool. When setting the torque value for an assembly power tool, you need a torque tester or torque sensor along with  a run down adapter. Make sure the torque capacity of the testing equipment fits within the torque range of the electric screwdriver.

When using a torque tester, place a run down adapter in-line between the drive of the tool and the transducer. Perform run downs and adjust the torque setting as needed for the electric driver. This serves as a simulated method.

The electric torque screwdriver typically features a scale on the torque adjustment nut, which lists a set of reference numbers. These numbers determine the approximate torque setting. Review the torque reference charts listed in the operation manual.

When the power tool is placed into the assembly station, you should verify the actual torque output on the actual fastening application. Use a rotary torque sensor to audit the power tool’s performance on the assembly application. Make sure the torque capacity of the testing equipment fits within the torque range of the electric screwdriver.

Connect the rotary sensor between an electric torque screwdriver and the fastening application. Monitor the torque being applied from the power tool to a fastener. There are items within the joint application that can impact the actual torque, like a soft rubber gasket or a plastic component.

Overtime, assembly tools start to drift out of tolerance. The best practice for monitoring this is to implement a torque testing system to be used as a tool checker. Routinely verify and audit the torque output of the electric screwdriver. Simple torque tests can be performed daily, weekly or monthly.

Torque Verifications & Audit Options

  • A torque analyzer is placed in the assembly area and serves as a production line checker.
  • Have a quality auditor routinely visit each assembly station. Use a rotary torque sensor with a torque testing display and verify the torque output.
  • Use a mobile testing system in the production area. The cart is equipped with all the necessary torque measuring equipment. It provides a convenient verification process to ensure assembly tools are within tolerance.

Measuring torque is a continuous process. Testing and auditing an electric screwdriver should be part of the assembly process. As part of the overall quality control process, manufactures should include a “Torque Auditing” program.

Using quality torque measuring equipment makes a safer world through accuracy and precision. Measuring torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.

Need assistance with testing or measuring torque for an electric screwdriver? Contact our technical support team and one of our representatives will be happy to assist you.

Auto Reversing Run Down Adapter for Power Tool Testing

With most standard run down adapters, after each run down the RDA needs to be backed off slightly before another run down can be performed. The AURA by Mountz is a unique run down adapter as it is designed to be an auto reversing run down adapter. The device is designed to only operate in a clockwise direction. When testing a power tool, a technician would complete a run down once the tool shuts off. Then the AURA automatically unwinds quickly for the next run down simulation. The device eliminates the need to back it out.

Power tools start to drift out of tolerance overtime. When testing a power tool using a torque tester or reaction style torque sensor, always use a quality joint rate simulator otherwise known as a run down adapter (RDA).

Continue reading Auto Reversing Run Down Adapter for Power Tool Testing

Innovative Manufacturing Milestones in the Past 50 Years

The world of manufacturing has evolved rapidly in the last 50 years. Innovation and technological advances have transformed our world at a fast pace. As new technology develops, old technology quickly fades away. The “must have” consumer products of today soon becomes a relic of yesterday.

Mountz was founded by Donald Mountz in 1965, a native Californian, with a passion to provide the highest quality torque tool products and customer service to world class manufacturing companies. Mountz is a pioneer in developing torque testers and sensors. In 1971, Mountz developed the ETA 1 electronic torque tester setting a new standard for measuring torque. Since then, Mountz has engineered and manufactured 17 generations of innovative torque testers and will continue develop the next standard in torque testing instruments.

There have been many changes within our culture, technology and manufacturing in the past 50 years, here are some fun and interesting milestones during that time frame with this video.

Continue reading Innovative Manufacturing Milestones in the Past 50 Years

Torque Testing with the FTA-100 Torque Analyzer

Often, regular tool calibration is forgotten, ignored or delayed. Similar to routine car maintenance, periodic servicing is necessary or repairs can become quite expensive. All torque tools must be properly calibrated and maintained on a preventative maintenance and calibration schedule. Calibrating a hand or power torque tool is process that manufacturers need to ensure occurs on standard and consist basis. Regular tool calibration ensures repeatable accuracy and adherence to international standards.

The Torquemate® FTA-100 is a new torque tester by Mountz, Inc. designed for torque testing and calibrating torque tools. The digital torque tester provides exceptional accuracy for measuring torque on various torque tools including pulse tools, hand screwdrivers, torque wrenches and power assembly tools. The small size and portability of the torque analyzer makes it ideal for checking torque tools on production floor daily or weekly to ensure the tools aren’t falling out of calibration.

The versatile and cost effective torque calibration instrument features the ability to count pulses, which is a key element for the setting the torque on a pulse tool as well as evaluating the maintenance schedule for a pulse tool. The FTA-100 unit displays both the peak torque reading and the number of pulses performed during a preset time frame to reach the final torque value. Continue reading Torque Testing with the FTA-100 Torque Analyzer

Measuring Torque: 10 Basic Questions to Ask When Selecting a Torque Tester

Measuring Torque

Testing torque is an essential component in the manufacturing environment for many companies. Measuring torque is a process that is often neglected or misunderstood, which may lead to the incorrect torque measurement equipment being selected or used for torque testing applications.

All torque testers can be used to measure torque. There are various types of torque analyzers to choose from and each torque meter may offer some slightly different features. When selecting a torque tester it is important to do your homework in advance. If you need assistance, don’t hesitate to ask for help. Call in a torque expert. Request a product demonstration to ensure you are selecting the proper torque measurement equipment that fits your torque testing needs.

A torque analyzer is a finely tuned instrument designed for testing, calibrating and monitoring torque applications. Selecting the proper torque testing instrument starts with you defining your testing needs. Some basic questions to start with are:

Torque Tester Selection: 10 Key Questions to Ask

  1. What type of torque tools are being tested or calibrated?
  2. What is the torque range needed to adequately cover all the torque tools being tested?
  3. Do you have a defined torque testing process?
  4. What is the type of torque is being measured: static or dynamic (or both)?
  5. Is the instrument being used for a torque verification process?
  6. Is the tester being used for a torque auditing program?
  7. Is the torque analyzer being used in a calibration lab?
  8. Do you need a flexible tester with the ability to connect with external torque sensors now or perhaps in the future?
  9. Do you need to collect, save and export torque testing data?
  10. If testing pulse tools, are you measuring pulses counts?

Mountz is a pioneer in developing torque testers. With nearly 50 years of experience and manufacturing expertise, Mountz has engineered and manufactured 17 generations of innovative torque testers. Being an ISO 9001 certified company and ISO 17025 accredited company, Mountz knows quality. Understanding that manufacturers have various torque testing needs, Mountz has developed a broad range of torque analyzers to meet those demands.

Daily, weekly and monthly, assembly torque tools are used to tighten fasteners with precision torque control. How do you know when a tool starts to drift out of tolerance? One solution is to have a torque analyzer system be used as a line checker. Have the tester placed in the production area and have the torque tools verified daily or weekly to ensure the tools aren’t falling out of calibration. Other options to consider is using a hand held portable torque meter system or have the torque testing system placed on a mobile cart. Then, your quality team can travel around to test and verify the torque output. Checking the tools more frequently with a simple torque tester, ensures assembly tools aren’t falling out of calibration, which will increase productivity and decrease product defects or rework costs.

Calibrating a hand or power torque tool is process that manufacturers need to ensure occurs on standard and consist basis. Regular tool calibration ensures repeatable accuracy and adherence to international standards. When selecting calibration equipment, it is key to select a flexible torque tester. A unit with the ability connect to an external torque sensor allows you to cover a wider capacity range of torque. The  instrument needs the ability to save and export calibration data for ISO and SPC documentation. The analyzer should be capable of handling various torque testing methods and support different units of measurement.

With a “Torque Auditing” program, the torque analyzer needs to work in conjunction with a torque sensor.  It needs to support testing and auditing methods that can measure items like “first movement” or “torque & angle” data. Measuring torque doesn’t stop once the assembly process is complete. As part of the overall quality control process, manufactures should include a “Torque Auditing” program. A method to detect loose fasteners or any signs of joint relaxation. Torque auditing validates the fastening process, the torque tool, the product design and the materials used for the application.

Manufactures that use pulse tools should consider a torque tester that measures both torque and pulse counts. An analyzer with the ability to count pulses provides a unique feature. This test data provides a guide for the setting the torque on a pulse tool as well as evaluating the maintenance schedule for a pulse tool. The new FTA-100 torque tester by Mountz displays both the peak torque reading and the number of pulses performed during a preset time frame to reach the final torque value. It is worth seeing the FTA-100 in action.

Companies looking to improve their product’s quality, safety and reliability should not overlook the importance of ensuring torque testing occurs in all phases of their manufacturing process. Measuring torque should occur in three facets of the assembly process.

  • Prior to Assembly
  • During Assembly
  • After Assembly

Using a quality torque tester makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners. Torque measurement should occur in all three facets of the assembly process.

Visit the Mountz torque analyzer website section for all your torque testing needs. Have a Mountz representative visit your facility and provide a torque tester demonstration. Request an appointment today.

Tips for Selecting an Adjustable Torque Screwdriver

Adjustable Torque Screwdriver

Finding the proper hand torque screwdriver for your torque application may seem like a daunting and confusing process at times. There are many, many options to choose from when selecting a torque screwdriver. Which tool truly fits my fastening application? That’s the key question you are looking to answer.

When you are unsure of the various differences between screwdrivers, selecting the low cost tool option is the easiest choice. It’s an easy justification. If the torque tool is not adequate or fails, the excuse of …”oh well, the tool didn’t require much investment”… is our acceptable rationalization.

Taking the time to educate yourself and understanding the various torque screwdriver options available is worth the investment. How critical is torque for your fastening application? A lack of torque control with a communications satellite or a cell tower can be a costly mistake. Obviously with an automobile, aircraft or missile, the failure to properly tighten a fastener or bolt to the correct torque specification can have potential catastrophic results. Therefore, is a quality torque screwdriver worth your investment? Continue reading Tips for Selecting an Adjustable Torque Screwdriver

Versatile Torque Tester for Measuring Torque & Pulse Counts

Torque Tester

The Torquemate® FTA-100 is a torque tester by Mountz, Inc. designed for torque testing and calibrating torque tools. The digital torque tester provides exceptional accuracy for measuring torque on various torque tools including pulse tools, hand screwdrivers, torque wrenches and power assembly tools. The small size and portability of the torque analyzer makes it ideal for checking torque tools on production floor daily or weekly to ensure the tools aren’t falling out of calibration.

The versatile and cost effective torque calibration instrument features the ability to count pulses, which is a key element for the setting the torque on a pulse tool as well as evaluating the maintenance schedule for a pulse tool. The FTA-100 unit displays both the peak torque reading and the number of pulses performed during a preset time frame to reach the final torque value.

Featuring an intuitive operating system the FTA-100 provides an auto filter frequency selection system based upon type of tool being used in peak mode. The easy-to-use menu structure allows engineers and calibration technicians to quickly perform torque tests and adjust settings as needed on the torque tester. The torque analyzer features an Over Current Protection (OCP) system that protects the unit from damage or malfunction.

The FTA-100 includes the Mountz Data Manager software that easily allows an engineer to collect and analyze the torque data. Mountz includes a free ISO17025 Calibration Certificate with the purchase of the new torque tester, which is instant cost savings.

Other key attributes the torque meter offers are a USB interface to download torque readings in “real time” and provides “EZ-Plug & Play” with Mountz torque sensors that feature “ARCII” technology, an instant auto-recognition system. Each Mountz torque sensor connected to FTA-100 is recognized automatically by the unit at the time of power-up.

Torque tools go out of calibration with use. To maintain consistent accuracy, torque tools must be checked periodically for wear or defective parts. A power or hand torque tool is a measuring tool that must be properly calibrated and maintained. Regular torque tool calibration and re-calibration guarantees the operator repeatable accuracy and adherence to international standards. Torque testing also ensures torque equipment is operating to peak performance and can highlight potential tooling problems before they arise perhaps due to tool wear or broken components.

Using a quality torque tester makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners. Torque measurement should occur in all three facets of the assembly process.

Improve your torque testing process today. Have a Mountz representative visit your facility and provide a product demonstration. Request an appointment today.

Auditing of Fasteners to Prevent Failures

The critical question must be asked: If proper joint design and proper torque application still do not guarantee that effective tension has been achieved, how can we know if the installed fastener meets the specification intended by the designer?Fastening errors can never be eliminated if proper technique and tools are not used. Audit discussion must begin with an understanding that a process is under control, until such time as variances in expected result are found. That does not imply that there should be a lack of auditing; in fact, the contrary is true.

The answer is in Auditing, a process used to validate, inform and confirm. Depending on how the word is used as a noun or a verb, the term audit has similar definition and meaning.

(n) the inspection or examination of a building or other facility to evaluate or improve its appropriateness, safety, efficiency, or the like: An energy audit can suggest ways to reduce home fuel bills.

(v) to make an audit of (a building or other facility) to evaluate or improve its safety, efficiency, or the like.

Even the most sophisticated fastening systems require torque calibration to ensure their accuracy or repeatability. Therefore, auditing is a necessary interrogatory to gain information about how a job was performed even when the process is being controlled perfectly. Clearly auditing is a preventative quality measure to help eliminate possible failure. Without an audit process we leave open the possibility of errors, failures or other additional costs.

Because of the variation in joints and the difficulty to create exact tension, it must be expected that torque auditing also have its pros and cons.

Traditionally there are there three main audit methods. These include first movement in the fastening direction, first movement in loosening direction (breakaway) and determining the rotation angle by marking the fastener; loosening it and determining the torque required to move the fastener back to the original position. While these methods can achieve the intended purpose they have drawbacks.

First Movement
1.First movement testing in the fastening direction is performed with a hand torque device.  It is necessary to load the fastener and observe the movement. The problem is that it is difficult to perform as first movement is difficult to “feel” with a measuring tool and it is extremely difficult to observe movement. First movement can be done by hand with a dial or digital tool, it can be done with an outboard transducer with angle encoder, but this requires fixturing of the transducer that is often challenging. This method provides an estimate of the current torque but gives no indication of how much movement is required to achieve the desired torque if the current torque is less than the desired torque.  Further, if done incorrectly, it can radically increase the joint load.

Breakaway – Loosening Direction
2. Breakaway is a loosening test of the fastener and as a rule is always less than the actual torque. Breakaway provides data on what it will take to “break loose” a fastener under load. Loosening the fastener is not practical where a system is being audited “live” and loosening the fastener could cause leakage. Further, if done incorrectly, it can cause the joint to be incorrectly tightened, creating more problems than answers. If locking compounds or other joint security devices is used, this is not an effective method of testing, as the audit results will be inconsistent.

Mark, Loosen and Retighten
3. This is a test where the bolt and application is marked with chalk or similar, then the bolt is loosened and retightened to the original marking. This is often not practical and again it gives no indication of how much torque is required to achieve the desired torque if the current torque is less than the desired torque.

The goal of auditing is to improve process results. To do this it is necessary to gather information for evaluation and analysis. An audit that fails to provide relevant information to improve the fastening process is worthless. Sometimes achieving proper torque requires practical experimentation. In order to experiment data is required. Depending on the audit strategy or information desired different techniques should be considered. Torque testers, torque sensors, dial wrenches and digital torque wrenches can be used for the auditing process. quickly and independently.

Using a quality torque measuring process makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently torqued can vibrate loose and excessive torque can strip threaded fasteners. t is important for many companies to ensure that proper torque is being applied and maintains gauge requirements associated with the ISO 9001 Quality Standard.

Need assistance with establishing a torque auditing program? Contact us, we are happy to assist you.