With most standard run down adapters, after each run down the RDA needs to be backed off slightly before another run down can be performed. The AURA by Mountz is a unique run down adapter as it is designed to be an auto reversing run down adapter. The device is designed to only operate in a clockwise direction. When testing a power tool, a technician would complete a run down once the tool shuts off. Then the AURA automatically unwinds quickly for the next run down simulation. The device eliminates the need to back it out.
Power tools start to drift out of tolerance overtime. When testing a power tool using a torque tester or reaction style torque sensor, always use a quality joint rate simulator otherwise known as a run down adapter (RDA).
The purpose of using a run down adapter is to simulate the fastening process of a screw. These durable run down adapters by Mountz are designed to provide consistent and reliable torque readings for use with power driven torque control tools. A run down adapter is mounted in-line between the tool’s drive and the torque tester or sensor, which may require other adapters or attachments. The AURA reduces the impact and irregular peaks that cause poor repeatability. Making a safer world through accuracy and precision is the core purpose at Mountz.
Using a quality run down adapter during the torque testing process makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.
With 50 years of experience, Mountz is a pioneer in developing torque testers and sensors. Talk with a torque expert. Have a Mountz representative visit your facility and provide a torque testing demonstration. Request an appointment today.
