Metric washers seem simple enough until it’s time for you to actually select the exact kind that you need. There are a wide variety of types, styles and grades to choose from. This is not only true of metric bolts or metric screws – it also applies when you’re looking for the right metric washer for the job. Flat washers, curved washers, split washers, internal and external washers – what’s the difference?
Let’s take a look at the various categories offered by Mr. Metric. The best seller is the good old flat washer, a thin, flat metal sphere with a large hole cut in its center. This versatile washer provides plenty of tension between the head of a screw or nut and the substrate for general-purpose applications. Curved washers and wave washers exert a lighter thrust load than flat washers and are used in rotating mechanisms such as bearings, motors and seals.
A split washer resembles a flat washer when viewed from the top, except for the obvious split in one section of the metal, but a side view reveals a slight coil in its design. This extra bearing surface distributes force loads more evenly for better tension control. A thicker variation called a Hi-Collar washer is a great alternative if you’re using smaller-headed screws.
Mr. Metric also offers two kinds of “tooth-lock” washers. External washers have a row of teeth along their outer edge that bite into the substrate for a superior grip. Internal washers have teeth on the inside of the washer hole – they don’t lock quite as effectively as external washers, but they look nicer in circumstances where cosmetic appeal comes first.
Contact Mr. Metric and let the staff help you select the perfect washer for your needs! Mr. Metric is the leading metric fastener specialist in North America. Well regarded as experts in metric, Mr. Metric is known for hard to find metric items at competitive prices.
