The MSP screw presenter is a simple machine to operate. The fasteners are poured into the hopper of the screw presenter and automatically line up for dispensing. This simple mechanism allows trouble-free operation, eliminating jammed or stuck screws. The screws are aligned along the screw-feeding rail with one fastener exposed and sitting in the bit guide.
The flexible MSP screw presenters is adjustable screw feeding device. These models can be adjusted to accommodate different screw sizes. No need to change or purchase additional rails. The rail guide is located inside the heart of the machine. It can be adjusted along with bit guide system (see Mountz product data sheet to view the exact screw size range for each MSP model). The video below provides tips for adjusting the rail guide section of the MSP screw presenter.
The constant repetition of picking-up and fumbling around with hundreds and hundreds of screws on a daily basis impacts productivity and costs. It’s an unnecessary expense and an inefficient process. And, a potential health hazard if fasteners are dropped and left on the floor, allowing an opportunity for an individual to slip and fall. Using a screw presenter during the fastening process is a productive solution.
The MSP screw presenter makes the fastening process more efficient. Using a quality screw feeding system makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.
If you require further technical support for adjusting the rail guide, please call our support staff at 1-866-404-2475 and one of our representatives will be happy to assist you.
Other Video Guides for the MSP screw presenter
View our video for tips with adjusting the bit guide.
View our video for tips with adjusting the speed, vibration, roller and brush settings.