Torque Arm Improves Safety & Ergonomics in Manufacturing

Linear Torque Arms

The manufacturing process is constantly evolving in response to customer needs and emerging technology. Managing the assembly workstation, tooling requirements, production flow and employee safety is indeed a challenge. The daily repetitive fastening process exposes your assemblers to potential stress injuries. Increasing your awareness of ergonomic challenges and looking for ways to improve operator safety and the assembly process are key objectives.

Daily, weekly, monthly, an assembly operator performs hundreds and thousands of repetitive fastening  rundowns. For the assembler, the repetition of holding and operating a torque tool without ergonomic safety equipment is a risk and opportunity for an injury. There is no excuse for having an ineffective ergonomic assembly process. Lacking the proper ergonomic tooling is inexcusable. Workers’ compensation claims are time consuming and preventable costs. Litigation expenses can quickly impact the bottom line. Providing your employees with safety and comfort lowers the risk of work-related injuries and increases productivity.

With different workstation configurations and fastening needs, Mountz offers an assortment of ergonomic torque arm solutions. The ergo arms are available in a variety of options, allowing you to choose a solution that is suitable for your fastening application and workstation configuration. The EZ-Glider linear torque arm offered by Mountz is one potential ergonomic solution to consider. The Mountz torque arm eliminates torque reaction of power and pneumatic assembly tools. Continue reading Torque Arm Improves Safety & Ergonomics in Manufacturing

Protecting Employees & Making the Assembly Station Ergonomic

Ergonomic Torque Arm

Whether your manufacturing staff is assembling components used for electronics, aircraft, automobiles or appliances, it’s important to identify potential ergonomic risk factors. Power tools, both electric and pneumatic type, generally produce unwanted torque reaction that transfers over to an operator’s hand. After a while, the daily fastening process will expose your operators to repetitive stress injuries, which can impact him or her anywhere from the neck down to the fingers. The results of work related injuries effect productivity, employee absenteeism, as well as costly workers’ compensation claims and litigation expenses.

Making the assembly station more ergonomic and protecting employees is a vital objective for any manufacturing organization. The goal is to minimize strain and stress on the assemblers’ bodies. Following good ergonomic practices will contribute to the overall safety, comfort and health of employees. Ergonomics should be a team effort. Actively having the assembly operators involved in the ergonomic discussion will allow them to help identify any areas of concern and improvement.

Ergonomic torque arms are designed to absorb any torque transfer from the tool to the operator. The telescoping torque arm is a popular ergonomic solution that can be utilized for variety of assembly tools and applications. The torque reaction arms are ideal for assembly lines like automotive, aerospace, appliance and electronics, where space is a premium and operator safety is mandatory. Continue reading Protecting Employees & Making the Assembly Station Ergonomic

Prevent the Risk of Injuries and Additional Expenses with an Ergonomic Solution

articulated torque arm

A power tool incidentally dropped by an assembly operator at a workstation, causes additional expenses and reduces productivity. Repairing and replacing parts for the assembly tool, recalibrating the tool after its been dropped or purchasing a new replacement tool are all additional, unnecessary costs.

Daily, weekly, monthly, an assembly operator performs hundreds and thousands of repetitive fastening  rundowns. If the assembly area lacks any ergonomic devices for the operator to use, it provides the opportunity for additional expenses to incur. You don’t have to play tennis to get “Tennis elbow.” Injuries caused by repetitive work and overusing the arm can occur in leisurely or daily work activities. Workers’ compensation claims are costly. Litigation expenses can quickly skyrocket.

These additional costs are preventable. When budgeting or purchasing a power tool for an assembly station, an ergonomic torque arm shouldn’t be viewed as an additional cost. It’s a preventive expense. A necessary action to prevent additional risks and costs from incurring in the near future. No one wants to be responsible for an injury occurring to a fellow co-worker.

There are many ergonomic solutions available for assembly-line workers today. Torque arms are available in various options and configurations, allowing you to select a solution that is well suited for your fastening application and workstation configuration. The EZ-Glider articulated torque arm offered by Mountz is one potential ergonomic solution to consider. Continue reading Prevent the Risk of Injuries and Additional Expenses with an Ergonomic Solution

Ergonomic Mindset Helps Ensure Safer Conditions

Linear Torque Arm

When using a power tool, torque control is only one element engineers must resolve and get dialed in for a fastening application. There are other issues that engineers should pay attention to as well. Is there any potential ergonomic issues that may arise from the application? What about cross threading and side load occurring as the assembly operator uses the power tool to run down the fasteners?

It’s not always easy for an operator to use a power tool and start the rundown process for tightening a fastener and keep it aligned properly. Especially when the operator is holding the power tool openly and freely with his or her hand. Cross threading can easily start as soon as the operator uses the power tool. A little tilt to the left or the right and cross threading can start. The sound of grinding occurs and the faster doesn’t run all the way down. Very damaging to the part, especially plastic applications. Now the operator must back the fastener out. Performing hundreds and hundreds of fastening repetitive rundowns, an operator’s aim can easily start missing the mark, which can increase the number of cross threaded occurrences. The time and cost to replace damaged parts slows down the assembly process and creates unnecessary rework.

Providing ergonomic safety for your operators during the assembly process is another element engineers need to determine. The cost for workers’ compensation claims continue to increase. For assembly applications, do you  have a strategy for reducing injury loses? Continue reading Ergonomic Mindset Helps Ensure Safer Conditions

Preventing Costly Ergonomic Issues in the Assembly Area

Ergonomic Torque Arms

As repetitive strain injuries, like carpal tunnel syndrome, continue to increase in the assembly workplace, awareness of ergonomic solutions should be on the radar for many companies. If not, the cost for workers’ compensation claims will become a costly and growing issue.

According to OSHA, “repetitive stress injuries (RSI), comprise more than one hundred different types of job-induced injuries and illnesses resulting from wear and tear on the body. RSIs are one of the fastest growing workplace injuries, and can result any time there is a mismatch between the physical requirements of the job and the physical capacity of the human body. Specific risk factors that can cause RSIs include repetitive motion, force, awkward posture, heavy lifting, or a combination of these factors”.

What is Ergonomics?
“The scientific discipline concerned with understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, methods and data to design in order to optimize human well-being and overall system performance”.

Ergonomics means
“fitting the job to the worker”
From the Greek Words
Ergo = Work
Nomos = Laws
Source : International Ergonomics Association (IEA) in 2000

Risk of injury for the assembly operator depends on the duration, frequency or intensity of exposure to the assembly job function. Assembly operators often can spend long periods standing and/or performing repetitive motions with torque tools over the course of their shift. Ergonomic solutions can considerably reduce the physical impact of these daily industrial tasks. Assembling mechanical and electronic components demands efficiency, space, productivity and ergonomics. Continue reading Preventing Costly Ergonomic Issues in the Assembly Area

Ergonomic Torque Arm Provides Ability for “Slide & Glide” Movement in the Assembly Area

Torque Arm

Crafted with a lightweight durable carbon fiber, the EZ-Slider torque arm slides up and down and provides X & Y axis mobility. A Gliding Rail System, an accessory product by Mountz, allows the EZ-Slider torque arm the freedom to travel horizontally (side to side) on a production floor. Combining these two items together allows a manufacture the ability to set-up a “Slide & Glide” movement with the EZ-Slider. The Mountz torque arm is an ideal ergonomic solution for multi-tool applications such as a moving production line where balancers are fixed to a trolley system.

The EZ-Slider torque arms are designed to improve production and quality control during the assembly process. The ergonomic design of the EZ-Slider torque arm reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The Mountz torque arm eliminates torque reaction of power and pneumatic tools.

When planning a production area, it pays dividends for manufacturers in the long term to plan the ergonomics of the operation and consult a health and safety inspector or ergonomic manager. Ensuring both the workplace and the assembly operation are compatible with the majority of operators that handle the assembly tools, reduces future costs arising from work-related health disorders among operators, along with costs arising from poor product quality. There are some key questions manufacturers need to ask about their production area.

Health and Safety Questions for the Assembly Workstation

  • How often do your assemblers complain of fatigue or arm pains?
  • How much does a typical injury cost the organization?
  • How many workman comp claims have you had?
  • How often does a health and safety inspector review your applications?
  • What ergonomic solutions are being considered for that application?

When operating torque tools for high torque and speed applications, companies need to consider both how the tool will be supported and how the torque reaction and speed will be dealt with in order to protect the operator. The EZ-Slider torque arm eliminates torque reaction of assembly tools and strengthens quality control during the assembly process. The Mountz torque arm can be used with a variety of assembly tools like angle nutrunners, DC nutrunners, pulse tools electric screwdrivers, pneumatic screwdrivers and other torque tools.

The flexible EZ-Slider torque arm provides manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminum extrusion or existing overhead system. The torque arms are maintenance free.

The goal for manufacturers must be to protect the operator from any potential injury and make them feel comfortable and secure in operating a tool.  Request an appointment for a Mountz representative to visit your facility and provide a product demonstration.