How to Measure Torque Output from Robotic Tool Drivers

Robots are known for repeatability. Programmed to perform mathematically-defined actions, as opposed to the associative actions taken by human operators, they will make nearly identical motions, over and over, for as long as they’re running. At least, that’s how the story goes on paper. In the real world, parts wear due to friction, lubrication dries in low humidity, dust gets in joints, and plastic, metal, and oil all expand and contract with changes in temperature. The longer a robotic assembly arm stays in operation, the more likely it is to fall out of calibration and deliver non-standard results.

Of course, since the assembly robot is programmed to perform identical actions, once it’s out of calibration, it will begin to perform identically incorrect actions. This will increase an assembly operation’s lost product rate if improper fastening is detected before the piece leaves the assembly floor. If incorrectly fastened products are sent to distribution or delivery, it can lead to liability suits and recalls. As such, it’s essential to routinely measure torque output from robotic tool drivers to ensure they remain in calibration. Here’s how.

Measuring Torque Output from Robotic Tool Drivers

There are three keys to success when measuring torque output from robotic tool drivers: measure regularly, measure in production conditions, and measure rapidly. Following these guidelines will keep your products on-spec and your tools on the line.

First, measure your tools regularly. Standard operating procedures on your assembly floor should include daily, weekly, and monthly tool measurement, depending on the criticality of your fasteners. When deciding how often to test your tool’s calibration, consider the working life of your product. What could happen if a fastener fails?

For some products, like pacemakers and other implantable medical devices, the repercussions of a loose screw are obviously dire. Similar precision is demanded in secure electronics manufacturing, where contractors building hardware modules for international banks and offshore betting sites must meet strict tamper-resistance standards for every chassis fastener. But even more mundane assemblies, like home appliance manufacturers, stand to suffer massive financial consequences if their fasteners fail. An overly tight screw in the main drive motor of a washing machine could snap after a mean 20 hours of heavy usage, leading to cascading recalls for every single machine assembled by the same robotic tool. This recall would have to be dated back to the last verified calibration test for the tool in question. The difference between weekly, monthly, quarterly, and biannual calibration testing expresses itself as an interval of liability. The longer you go between tests, the more liability you’re exposed to.

Compensating for Friction Loss When Measuring Torque Output

Next, measure in as close to production conditions as possible. Think of a tool’s torque output as a paycheck. Imagine a person with a yearly salary of $70,000. Does that mean they take $70,000 home to put under the mattress? No. There are taxes off the top, then rent or mortgage payments to make, then bills, food, entertainment, etc. The actual amount of money that person gets to keep is significantly diminished once external factors are taken into account.

For robotic torque tools, the primary external factor is friction. A tool which produces 7 pound-feet of torque in the air will actually deliver significantly less than that once the inertia and friction of the fastener, joint material, and spacers (such as washers and gaskets) take their toll. So, testing a robotic tool driver on a standard torque tester, which lacks these external factors, won’t return accurate calibration information. A tool which reads as within tolerance may, in fact, be chronically under-torquing fasteners. Or, if working on a highly lubricated joint, it could be over-torquing them.

A rotary torque sensor is a good tool to test the actual torque being applied on the assembly application. These torque sensors attach at the head of the tool and measure the tool’s output on the actual joint it is fastening. This takes into account any friction loss and inertia the tool’s operator must overcome, providing an accurate measurement.

So, in order to measure rapidly—and to keep your tools working productively for as much of the day as possible—combine methods. Use a rotary torque sensor to determine how much torque your robotic tool driver actually needs to put out in order to properly fasten its joint. Then test it in the standalone torque tester using that adjusted value, not the bare value provided in the engineer’s specifications or a basic fastener torque chart. Using this method, you can accurately test your robotic tool driver’s calibration in a minute or less on a daily basis.

By routinely testing the calibration of your robotic tool drivers, you can reduce lost product due to the improper fastening of joints. At the same time, you’ll reduce your exposure to risks such as recalls or litigation due to severe or widespread product failure. To measure calibration, use rundown adaptors to determine the actual torque output needed to fasten each joint. Then test your tools using that value in standalone torque testers on a frequent basis.

At Mountz Inc., we know you depend on the accuracy of your robotic tools. That’s why we’ve developed state-of-the-art calibration and testing equipment that can quickly and accurately let you know whether your tools are in calibration. To see our full range of torque testers and torque sensors, browse our catalog. Contact us anytime to ask a question. To inquire about price, request a quote. If you’d like to see our equipment in person, schedule an appointment.

Robotic Screwdriver System

There are various manufacturing strategies for keeping assembly lines operating productive and proficiently. Not all assembly applications are alike and each one provides a different set of obstacles that need be resolved. Manufacturing engineers must confront challenges with ongoing ergonomic issues, rising labor expenses and inefficient fastening tools. An assembly line that is ineffective and not profitable will be shut down or shipped overseas. For high volumes fastening applications, the strategy of abandoning semiautomatic fastening systems and manual screwdriving tools in favor of fully automated equipment is a solution.

Mountz offers the next generation of automation and process control in screw fastening technology. The SH-Series is a durable torque and automation control system engineered system engineered for precision accuracy and repeatable torque control. The high performance robotic fastening system allows manufacturers to optimize the assembly area, reduce labor costs and increase productivity.

The SH-Series delivers cost savings and quality benefits through useful features such as digitally adjustable torque setting, variable torque and speed control, multiple I/O options for integration with PLC and other line control techniques. A Windows-based software package that can customize each fastening application is included with the product. The torque control system features built-in error-proofing data and screw counter. Multiple fastening strategies can be implemented for sensitive and/or difficult assembly joints. The SH-Series tool increases productivity as one tool can be programmed to do the job of multiple conventional tools; saving time, maintenance cost, space and training.

The SH-Series robotic system features a programmable digital torque control with memory for 8 preset torque settings. The robotic screwdrivers are built with an AC servo motor system. The torque is controlled by the motor’s current, which provides precision torque control. Built for both critical low and high torque fastening applications, Mountz offers various automation models that range from 0.43 – 564.2 inch-pounds. The controller of the SH-Series includes a built-in screw counter, which prevents screw-fastening errors and detects cross threading, omissions, unfinished rundowns and cycle incompletes.

The objective of the screw counting process is to ensure that all fasteners are accounted for during the assembly process. Further a fastening error is identified on the assembly line, the more it costs in rework time and expenses. If a fastening error is committed and detected during the assembly process, the operator can correct it or prevent the faulty product from moving along the manufacturing line or being shipped out to a customer. Making a safer world through accuracy and precision is the core purpose of Mountz, Inc.

The SH-Series is a revolutionary step with screw fastening technology. The robotic system is engineered for automation applications and provides a manufacturer with a rapid, reliable and precise method of fastening screws. Today’s fastening process is about providing quality torque control for manufacturers with a greater ability to achieve repeatable performance, optimize production and remain cost competitive. The Mountz automation tool system improves productivity and efficiency.

6 Key Essential Manufacturing Benefits for using Mountz Robotic Screwdrivers

  • Reduces the production cycle.
  • Production flexibility and rapid reconfiguration for new production projects.
  • Provides a consistent repeatable process control and eliminates potential variations.
  • Integration control and data exchange.
  • Optimum asset utilization. Tooling expense delivers favorable return of investment.
  • Maintenance and repair are easy and low cost.

Refining the assembly method and implementing automation equipment is significant opportunity for manufactures to improve their production process. The SH-Series torque and automation control system will improve the fastening process and reduce manufacturing costs.

Using a quality robotic torque control system makes a safer world through accuracy and precision. Measuring torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.

Automate your fastening process. Enhance torque control and reduce your manufacturing costs. Have a Mountz representative visit your facility and provide a product demonstration. Request an appointment today.