Using Thread Locking Patches for Fasteners

For parts that are fastened together and endure constant vibration, fasteners may lose grip over time. What’s the solution? A thread locking patch applied to the screw. A thread locking patch is a simple concept. The threaded area of the screw is treated with a dot of nylon, or a layer that wraps completely around it. The patch increases the prevailing torque and provides excellent vibration resistance, allowing the screw to be locked in any position when assembled. Nylon-patched screws will maintain their grip even under conditions of constant vibration and low-level heat, making them especially popular with the automotive and aerospace industries.

Mr. Metric (a Mountz company) is the leading metric fastener specialist in North America. Well regarded as experts in metric, Mr. Metric is known for hard to find metric items at competitive prices.  Contact Mr. Metric and let our staff help you with any fastener patching needs!

Stop Fumbling with Screws

Screw Presenters

Conventional assembly methods cause assemblers to inefficiently fumble with screws that are stored in bins or shaker trays. Fumbling isn’t just a football occurrence. Daily, assembly operators using power tools fumble around picking up screws from bins and slowly align the fasteners onto a bit. In an attempt to grab one fastener at a time, several screws often stick to the operator’s fingers. Screws can easily be dropped across a workstation or fumbled to the ground. Smaller the fastener is, the more extensive the challenge becomes for an operator to efficiently pick-up a screws from a bin and perform the fastening process in a timely, productive manner.

The constant repetition of picking-up and fumbling around with hundreds and hundreds of screws on a daily basis impacts productivity and costs. It’s an unnecessary expense and an inefficient process. And, a potential health hazard if fasteners are dropped and left on the floor, allowing an opportunity for an individual to slip and fall.

Using a screw presenter during the fastening process is a productive option to consider. A tabletop screw presenter is typically small and compact. It is used to organize and automate work areas and production cells. Screw presenters make assemblers and the assembly process more efficient by mechanically presenting a screw to a fixed pick up point. These feeders can be used in combination with most any assembly application and power tool. Alternative methods of presenting a screw are cumbersome and very expensive.

Assembly Process Improvements with a Screw Presenter

  • Eliminate slow process of picking-up screws from bins
  • Make the fastening process more efficient
  • Screw feeding system organizes & automates the assembly area
  • Screw presenters operate with power assembly tools

A screw presenter is simple machine to operate. The fasteners are poured into the hopper of the screw presenter and automatically line up for dispensing. This simple mechanism allows trouble-free operation, eliminating jammed or stuck screws. The screws are aligned along the screw-feeding rail with one fastener exposed and sitting in the bit guide. Once the bit of the power assembly tool engages with the screw head and the fastener is removed, then another screw automatically dispenses to the bit guide and is ready for an easy pick-up. No fumbling with screws.

For a power tool to pick-up a fastener from the screw presenter there are two standard options. Either the bit used with assembly tool is magnetized or a power tool is equipped with a vacuum adapter kit. A magnetized bit will retrieve most screws from the screw presenter. For non-magnetic and stainless screws, an assembly tool will require a suction attachment to pick up fasteners from the screw presenter.

Some screw presenter models have a limited fastener size capacity that can be utilized with the machine. While other models may require you to purchase an additional a screw-feeding rail in order to adapt a different screw size. There are flexible screw presenters that are fully adjustable. These models can be adjusted to accommodate a wide variety of screw sizes. No need to change or purchase additional rails. Always select a tool that best fits your fastening application.

When utilizing a screw presenter in the fastening process, the typical pick-up rate capacity is up to two screws per second. The enhancement of productivity is estimated to improve assembly time by nearly fifty percent.

Using a quality screw feeding system makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.

Stop screw fumbles. Take steps to the improve assembly process. Implement equipment that will make the fastening process more efficient. Contact us – we are happy to assist!

Screw Counter Reduces Costly Screw-Fastening Errors

Screw Counter

A screw counter helps manufacturers detect and eliminate costly screw-fastening errors during the assembly process. Using a screw counter is like putting the eyes and ears of a quality control manager where they are needed most – right on the assembly area. The Scout screw counter from Mountz Inc. verifies that all fasteners have been installed and seated properly. The screw counter takes the control of the assembly process out of the operator’s hands.

Designed to detect cross-threading, omissions, unfinished rundowns and cycle incompletes, the Scout ensures the assembly process is done correctly the first time. The Scout operates jointly with Mountz electric screwdrivers and STC30, STC40, ET-30D, FT30-D and YFC35-D power supplies. With four ports on the side of the Scout, a maximum of four screwdrivers can share one program with the unit. The Scout features the ability to ‘learn’ the characteristics of not only the power tool but also that of the application that it is being used on. This allows the Scout to distinguish between a fastener that was properly seated and one that was either stripped or cross-threaded.

The intent of the screw counting process is to ensure that all fasteners are accounted for during the assembly process. The later an error is detected on the assembly line, the more it costs in rework time and expenses. If a fastening error is committed and detected during the assembly process, the operator can fix it by properly completing the process or prevent the faulty product from being moved down the line.

The Scout can be either programmed by the PC software or manually through the keypad. The unit gives the operator audible and visual indications that the assembly has been completed or if it has been rejected. If a fastening error is detected, the Scout alerts the operator with a buzzer sound and displays a red light indicating a screw fastening error. The unit displays the type fastening error that occurred on its screen.

Key Benefits of a Screw Counter

  • Error proofing and process control
  • Verifies that all fasteners have been installed properly
  • Detect fastening errors
  • Ensure the assembly process is done correctly the first time
  • Detect cross-threading, omissions, unfinished rundowns and cycle incompletes
  • Inputs and outputs for machine & PLC interface for line control

The Scout features the ability to store multiple fastener settings for applications that use a variety of fasteners. The flexible screw counter can be integrated with a PLC system, to activate other functions for line control. The Scout offers password protection to prevent incidental or operator tampering of settings. Requiring little space, the Scout’s compact design and mounting brackets allows the unit to easily be integrated into the workspace without disrupting the production flow.

The Scout screw counter improves production yields, manufacturing costs, product quality, product reliability, reputation and profitability by ensuring that every assembly has been subjected to a quality control review process right on the assembly area.

Using a screw counter makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.

Complex fastening regimes with multiple screws and high-speed production can lead to missed screws and compromised quality. Verify fasteners aren’t missing during the production process. Have a Mountz representative visit your facility and provide a demonstration of a screw counter. Request an appointment today.

Understanding Why Length Dependency Impacts the Use of a Torque Wrench

Length Dependency

Not all torque wrenches are alike. When selecting a torque wrench or operating a wrench, it’s important to understand the functions of the tool being used for the fastening application. Take time to read all instructions provided to fully understand the working features and manufacturer recommendations.

The design of certain wrenches, make the tool “length dependent”.  What does that mean? It means that the actual torque applied to the fastener varies if the hand position on the wrench is varied (even if the wrench is preset). This occurs if the pivot point of the wrench mechanism is not coincidental with the center of rotation of the fastener or bolt.

Therefore if an operator is holding a “length dependent” torque wrench at the end of the handle, the torque output might be 25 foot-pounds applied for the fastening application. If the operator then changes his or her grip position and holds the wrench at the middle location of the handle, the torque output might be 50 foot-pounds applied for the fastening application.

What is Torque?
Torque is a “turning” or “twisting” force and differs from tension, which is created by a straight pull. However, we use torque to create a tension.

How?
As the nut and bolt are tightened, the two plates are clamped together. The thread angle in the bolt converts the force applied into tension (or stretch) in the bolt shank. The amount of the tension created in the bolt is critical.

Why?
A bolt tensioned properly works at its optimum efficiency and will resist coming undone. However, if the tension is too low, the nut could vibrate or work loose. If the tension is too high (overstretched), the bolt could break. Every bolt has a correct optimum torque/tension figure for each fastening application. It is important to have these figures available so that the end product will be safe, efficient and economical.

How is Torque Measured?
Torque is the result of multiplying the value of Force applied by the Distance from the point of application.

Not all torque wrenches are “length dependent.” Click wrenches, break-over wrenches and other wrench types are commonly a length dependent tool. However there a few click wrenched that are “non-length dependent”, like the Mountz DM-Series click wrench.

Most quality cam-over torque wrenches are a “non-length dependent” tool. Built with a cam-over design, these accurate torque wrenches prevent a fastener or bolt from being under and over tightened.  As quality control tool, the Mountz cam-over wrench allows any user to deliver the correct torque with confidence regardless of task and operator skill level.

Before using a torque wrench, make sure you are educated about the correct function of the tool and how to properly use it. Simply picking up the wrench and tightening a fastener until it’s good and tight may not deliver a quality result.

Using a quality torque wrench makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently fastened can vibrate loose and excessive torque can strip threaded fasteners.

Need assistance with a fastening application, request an appointment for a torque tool demonstration by a Mountz representative.

 

Tips for Selecting the Proper Nut

Metric Nuts

What do all the different nuts do, and which type or types do you need to purchase? Let’s take a glimpse at the world of nuts.

The essential purpose of any nut is to mate with a bolt to discourage the bolt from loosening its grip against a surface. When you thread a nut onto a bolt until it sits tight against the opposite side of the surface from the bolt head, you create a kind of stress on the threads called preload, which holds both parts in position.

What is “preload”?

The tension created in a fastener when it is first tightened. The preload must be greater than the external forces applied to the assembly to prevent joint failure.

Nuts come in a wide range of sizes and shapes, though the trusty six-sided hex nut is probably most well known. Some nuts have shapes that allow for protruding bolt heads, such as the acorn nut with its hollow cap-shaped head. Wing nuts have wing-shaped handles for easy tightening by hand. Sometimes the shape of the bolt determines the shape of a nut. If you’re using a square bolt, for instance, you’d want a square nut. Continue reading Tips for Selecting the Proper Nut

Quick Guide: DIN and Standards for Fasteners

Most of the world has gone metric in its industrial measurement standards. But since we don’t necessarily “think metric” on this side of the planet, it’s understandable that you might be puzzled by the various international standards sporting esoteric acronyms such as DIN and JIS. Allow us to shed a little light on the subject so that you can order your metric fasteners with confidence.

DIN and JIS are the two primary standardization systems used by various industries worldwide. DIN, or “Deutsches Institut fur Normung e.V.,” is Germany’s national standards organization. There are DIN numbers for practically every product you can think of, from paper sizes to film speed.

JIS stands for “Japanese Industrial Standards” and is controlled by the Japanese Industrial Standards Association in accordance with the Industrial Standardization Law of 1949. The initials JIS are followed by another initial that stands for a particular industry or application, followed by a four-digit part indicator. ISO (International Standards Organization) is another international standard. JIS and ISO numbers aren’t all that widely used here in the U.S., though JIS remains the primary standard in Japan. But whatever standards you use, as long as you know what part you need, Mr. Metric can help you make sure you order the right item.

 

 

 

Where did Metric Screws Come From?

A Brief History of the Screw

We use metric screws and screwdrivers all the time – but where did these ingenious devices come from? They weren’t always there, after all. Here’s a little mini-history of everyone’s favorite fastener.

The basic idea of the screw first came about in the 1st Century A.D. But these early wooden screws weren’t intended as fasteners – they were used instead to drive pressing machines such as oil presses and wine presses. The first slotted metal screw used as a fastener was produced in Germany in 1513.It was simply a length of steel or brass wire that had been hammered flat at one head to form the head, with the slot and threads filed cut by hand. Henry Maudsley of England created the first practical screw manufacturing lathe in 1797, a feat duplicated in America by David Wilkinson the following year.

Screws started to get really interesting in the 20th Century with the invention of the square-drive Robertson screw in 1908 (a major factor in holding the Ford Model T together), followed by the Henry Philips’s Philips-head screw in the 1930s. Philips-head screws aided assembly-line production because of their ability to fasten more tightly, using greater torque, without causing any compatibility issues with the assembly equipment of the era.

Obviously it’s a lot easier to use a screw when you have a device expressly designed to drive it. The first general-purpose “screwdriver” was the simple flat-bladed bit developed for carpenters’ braces in 1744. Once some 19th-Century genius added a handle, the screwdriver as we know it was off and running. Screws and screwdrivers have only gotten more diverse over the decades, and today there are so many kinds of screws that the problem is choosing the right one.

Finding the Right Fastener for the Job

One fastener does not fit all. Do you have the right ones for your needs?

Many of the screws we sell work for a wide range of applications. Examples of good general-purpose fasteners include our line of metric pan screws, which come in slotted, Philips or Torx varieties. If you don’t have, say, a truss, or binding head screw, you can most likely drop one of these in as a substitute. Other screws, however, work well in one type of situation but not in another.

Sometimes it is the material that makes the difference. Nylon, for example, is great for electrical assembly work because it doesn’t conduct electricity and won’t corrode. But for large-scale structural fastening, nylon just isn’t strong enough. Stainless steel screws, on the other hand, are both strong and corrosion-resistant for those big outdoor industrial applications. But environmental considerations can mean more than just “indoors versus outdoors.” Fasteners used in boats, for instance, must stand up against seawater, as our stainless A-4 metric hex bolts do.

And what about head types? Do you know when you need socket or socket shoulder screws, button head screws, or pipe plug screws, and what application each kind of screw performs best? Chances are you don’t — and that’s why you need Mr. Metric, they live and breathe fastener technology. Mr. Metric is the leading metric fastener specialist in North America. Well regarded as experts in metric, Mr. Metric is known for hard to find metric items at competitive prices. The staff at Mr. Metric are happy to advise you personally on the ideal screws, nuts or bolts for your specific needs. If you have any doubts on what fasteners you need, contact Mr. Metric.

Not only make sure you order the right fastener for the job, but also make sure you are using the proper torque tool for the fastening application. Whether you are using a torque wrench, torque driver, electric screwdriver or a pneumatic screwdriver, controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Fasteners that are insufficiently torqued can vibrate loose and excessive torque can strip threaded fasteners. Using a quality torque tool has become increasingly important for many companies to ensure that proper torque is being applied and maintains gauge requirements associated with the ISO 9001 Quality Standard.

General Guidelines to Help Identify Potential Pitfalls When Tightening Bolted Joints

These general guidelines are to help identify potential pitfalls relating to the tightening of bolted joints.

Use a calibrated Torque Tool: Ensure that a calibrated torque tool is used and that a torque value is specified on the tightening specification. Be aware that certain automatic tightening tools, such as impact wrenches, can result in significant variations occurring in the torque value and the bolts preload. A calibrated torque tool should therefore be used for the final tightening operation or inspection.

Specify the correct tightening torque: Whenever feasible, specify the tightening torque based upon actual test results rather than a theoretically calculated value. Experimental determination of the tightening torque can be established by measurement of bolt extension, strain gauges or by the use of a load cell embedded in the joint.

Specify a Tightening Sequence: The majority of joints consist of more than one bolt and bring together surfaces that are not completely flat. The sequence of tightening bolts can have a major influence on the resulting preloads. With such joints, consideration should be given to specifying the sequence in which the bolts are to tighten. Because the joint surfaces compress, tightening one bolt in the vicinity of another will affect the preload generated by the first bolt tightened.

A good tightening sequence ensures that an even preload distribution is achieved in the joint. Since joints containing conventional gaskets have a comparatively low compressive stiffness, bolt preloads in such joints are particularly sensitive to the tightening sequence. Based on experience, if the bolts are in a circular pattern, a cris-cross tightening sequence would normally be specified. For non-circular bolt patterns, a spiral sequence starting at the middle would normally be specified.
Continue reading General Guidelines to Help Identify Potential Pitfalls When Tightening Bolted Joints

Ensure Every Screw is Correctly Tightened in the Correct Sequence with Position Control Torque Arm

Position Control torque arms are designed to reduce the risk of improperly fastened screws, ensuring that every screw is in the correctly tightened in the correct sequence. Using a Position Control torque arm is like putting the eyes and ears of a quality control manager where they are needed most – right on the assembly area.

“Sequence based fastening is critical to proper process control and a quality fastening result for many applications,” said Brad Mountz, President & CEO of Mountz, Inc. “If an assembly exhibits cross talk, a phenomenon where torque to one fastener changes the result to another in the in fastening pattern, altering the sequence is often necessary to achieve proper results. An encoded torque arm is perfect because it guides the operators sequence and provides feedback if done incorrectly.”

The new EZ-Glider Position Control torque arms by Mountz Inc. help manufacturers detect and eliminate costly screw-fastening errors during the assembly process. Assembly sequences are easily programmed for the torque arm from an easy-to-use control box. Up to nine sequence programs can be stored and are manually or automatically selected for easy recall.

Continue reading Ensure Every Screw is Correctly Tightened in the Correct Sequence with Position Control Torque Arm